stunthanger.com

Engine basics => Engine set up tips => Topic started by: bill marvel on October 25, 2006, 07:29:23 PM

Title: Cox .020 prop source
Post by: bill marvel on October 25, 2006, 07:29:23 PM
I've got a couple of Cox .020's in good condition.  I have some projects control line projects in mind for them.  I'd like to find a source for props.  I am down to three.  The usual prop is a 4-2.5.  I found a 4.5-2 at the hobby shop on the edge of AMA HQ but they only had one.  Any ideas?

I also need a couple of those little .020 wrenches if I can find them.

regards
bill marvel
Title: Re: Cox .020 prop source
Post by: posthole_digger on October 26, 2006, 07:27:46 AM
Tower Hobbies lists an APC 4.2x2.

Paul
Title: Re: Cox .020 prop source
Post by: bill marvel on October 27, 2006, 01:46:46 PM
I posted this request too soon.  A Google search gave me a Cox site that still had some parts.  I was able to get props, two wrenches and a spare glow head.

Thanks for the help.  I will get a few props from Tower the next time I send them an order.

regards
bill marvel