stunthanger.com
Engine basics => Engine set up tips => Topic started by: Gerald Arana on June 22, 2017, 07:58:56 PM
-
This ABC P/L is from an estate and I want to know what it is for. The bore is .801-.803 and about 1-1/8" long as best as i can measure it. It looks new to me.
Thank you, Jerry
-
Others will doubtless know more, but the big slightly squared head makes me think of a car engine. The bore size you mention says its a big motor!
-
This the head , magnum maybe being ABC not ABN ?/
http://shop.rotor.com.sg/images/Product/17532/size.gif
-
This ABC P/L is from an estate and I want to know what it is for. The bore is .801-.803 and about 1-1/8" long as best as i can measure it. It looks new to me.
Thank you, Jerry
It looks like a Magnum 36 XL ll sleeve and head, the 36 is .807 bore , with the short throw, has a short sleeeve
it is a true chrome engine, but your set is missing the piston
Randy
-
It looks like a Magnum 36 XL ll sleeve and head, the 36 is .807 bore , with the short throw, has a short sleeeve
it is a true chrome engine, but your set is missing the piston
Randy
Thanks guys. I know its missing the piston! y1
I just wanted to know if it could be identified. Now I can go in search of a piston!
Thanks for the responses, Jerry
-
Do you believe that any old piston will fit? These things are usually matched, and then honed or lapped.
-
if it is a Magnum 36 I will buy the head from you, the sleeve is a piston/sleeve matched pair, so the sleeve may, or may not work for you
Randy
-
if it is a Magnum 36 I will buy the head from you, the sleeve is a piston/sleeve matched pair, so the sleeve may, or may not work for you
Randy
Randy,
You have my attention. Do you want me to send it to you?
Floyd, Yes, I know they are in matched sets. And NO, I'm not looking for any old piston! LL~ LL~ LL~ Unless of course you have one laying around that will work....... o2oP
-
Randy,
You have my attention. Do you want me to send it to you?
Floyd, Yes, I know they are in matched sets. And NO, I'm not looking for any old piston! LL~ LL~ LL~ Unless of course you have one laying around that will work....... o2oP
Yes let me know what you want for it, send it to me if it is a Magnum 36 head I will buy it, if not I will send it back
Randy
-
Yes let me know what you want for it, send it to me if it is a Magnum 36 head I will buy it, if not I will send it back
Randy
Ok, will do.
Jerry
-
Randy,
Did you get the head? And is it what you were looking for? Or are you going to send it back?
If its what you are looking for, is my price/deal OK with you?
Thank you, Jerry
PS: Yeah I know, lots of questions! LOL.
-
Randy,
Did you get the head? And is it what you were looking for? Or are you going to send it back?
If its what you are looking for, is my price/deal OK with you?
Thank you, Jerry
PS: Yeah I know, lots of questions! LOL.
Hi Jerry
yes i have it, the head is a Mag 36 and I can use it, the sleeve is useless to me, but yes the parts you asked for I am getting up, I have the venturie , and I have every Enya NVA but that one, however if you want a ST tye I can send that now, or I have 45 size NVAs coming
Randy 678 407 9376
-
Hi Randy,
Thank you. I would rather have the Enya type. I don't want to drill the venturi to fit.
Looking forward to a fine running engine!
Cheers Jerry
-
Thank you Randy!
I got home last night after a hard week of fishing and there it was. It is perfect! ;D
Jerry