stunthanger.com
Engine basics => Engine set up tips => Topic started by: Robin_Holden on April 20, 2010, 01:46:53 AM
-
Greetings fellas from a sunny [ at last ! ] S.W.France.
My Brodak 40 has been carefully run-in.
It's installed in a Sig Banshee and ready to rock n'roll.
My fuel is 5% nitro , 24% lube' [ 50/50 ]. Uniflow plastic tank .
What would be your recommended prop' please ?
Oh..... It's a great engine by the way .
Much obliged for any contributions ,
Robin [ ex-pat Brit in the Charente full of ex-pat Brits ]
-
Mornin' Robin, I have been runnin' mine with 5% nitro and a 10x5 APC prop, seems to like it real well..
Hope that this helps... D>K
-
I have found the Master Airscrew 11X4 works great on mine in a Nobler and Smoothie both at 42 oz.
-
So far I am sold on the Top Flite Power Point 11-4 wood blade. Have tried the APC 11-4 and it is heavy. Zinger 11-4 is too thick. Master Airscrw 11-4 wood is the nxt best prop, just need to order some more of them. By the I use Excalibar 10% with 22% oil(1/2 & 1/2). Also run in a rich two stroke mode. H^^
-
The two best B-40 props that I have found are the APC 10.5 x 4.5 and the Thundertiger 11X4.5. 8)
-
My B40/NoblerARF really likes the Zinger wood 11-5 cut down to 10.5.
-
Much obliged guys for all your contribution , many thanks.
Robin.
-
Cyclone 11 x 4.5 is an excellent cheap prop for the Brodak 40 and many othe rmotors
Randy
-
I've watch Pete Peterson flying his Rondenelli Venus with a Brodak 40 and the Cyclone 11x4.5 prop for awhile. Great setup.
-
Top Flite 11-4 works brilliantly in mine.