News:

*
  • July 05, 2025, 09:31:11 AM

Login with username, password and session length

Author Topic: OS25FP needle valve  (Read 806 times)

Offline James Mills

  • AMA Member and supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1305
  • Welcome to the Stunt Hanger.
OS25FP needle valve
« on: August 18, 2010, 09:57:38 PM »
Is there another needle valve assembly that works well for the FP 25 if you don't have an orgional?

James
AMA 491167

Offline Bootlegger

  • 22 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2711
Re: OS25FP needle valve
« Reply #1 on: August 19, 2010, 05:12:38 AM »
  Try a Super Tiger, they work well. Seems that the 51 is the one that I use, but check, and you will have to drill the venturi and case to about .166 as the tiger needle is somewhat larger..
     Good luck :!
8th Air Force Veteran
Gil Causey
AMA# 6964

Offline Brett Buck

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 14501
Re: OS25FP needle valve
« Reply #2 on: August 19, 2010, 03:41:07 PM »
Is there another needle valve assembly that works well for the FP 25 if you don't have an orgional?

James

  The ST or PA works if you drill out the hole, and then make the venturi larger. But you can still get the originals from Tower.

    Brett

Offline Geoff Goodworth

  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 818
Re: OS25FP needle valve
« Reply #3 on: August 20, 2010, 07:01:24 PM »
To save you some work, the Tower catalogue number for the OS NVA is LXCR49.


Advertise Here
Tags: