stunthanger.com

Engine basics => Engine set up tips => Topic started by: bob branch on June 22, 2006, 07:30:42 PM

Title: aerotiger mounting holes
Post by: bob branch on June 22, 2006, 07:30:42 PM

Can anyone tell me if the Aerotiger .36 mounting holes match up with the Brodak .40 holes? What about lengths to the spinner backplate?

thanks,

bob branch

Title: Re: aerotiger mounting holes
Post by: captcurt on June 23, 2006, 05:34:37 AM

Same as the ROJett .40 BSE!! #^  ;)

Curt

Title: Re: aerotiger mounting holes
Post by: Steve Holt on June 23, 2006, 01:45:03 PM

The Brodak 40 is a "drop in" replacement for the OS Max S 35.  The holes do not line up with the Aero Tiger - the Brodak fore to aft spacing is about 1/8" longer.  The shaft on the Areo Tiger is also a bit longer.  If you align the forward mount holes, it is almost 1/4" longer than the Brodak to the back of the prop.
Steve

Title: Re: aerotiger mounting holes
Post by: RandySmith on June 23, 2006, 04:46:16 PM

The  AERO Tiger
Is the  same  mount as a  Thunder tiger 36
Magnum 32  -  36
OS  32
And most  ALL of the small case  Heli Motors

Regards
Randy