Vendors Corner > Eliminator Props
Carbon Fiber Props
Steve Wilk:
Cabon Fiber Stunt Props
I've been making Carbon Fiber Props for more then 15 years now with over 100 different props. I have several Stunt Props, landing gear and a 4" bellcrank and I'm in the process of adding 16 new props. Check out the attachment to see what I have and what I'm working on.
Steve Wilk
swilk117@yahoo.com
Steve Helmick:
Steve...I bought some of your props from Burt Brokow when he was up here for the NW CL Regionals last Spring. I haven't had the chance to try them all, but did fly the 10 x 3.5 3 blade Tornado copy. I guess this would have been a finished prop, because the balance was almost perfect and it was pretty much plug n' play. I need to increase the pitch in it a bit, but you're props are nice stuff and prices are good. I hope to get some of the others tested by next Regionals, and I'll report my findings. I hope Burt brings more props (and CF LG's) next year. I didn't get to see a BC. It would be cool if you could post some information on the codes...like the T3-1 is the 3 blade I tried, and what's this T-11 for? Etc.! H^^ Steve
Youse guys buy props from Steve Wilk!
Steve Wilk:
Hi Steve
Thanks for trying my props. I currently working on a web page that will have all the info on each props along the prop orgines. I'm also make molds for several of the Rev-up props and hope to have those available next month. I've attached a Pic of the Bellcrank. The Bellcrank is made from one piece 12K tow, wrape around several times. It has a 1/8" ID bronze pivot bushing with 3/32" ID brass lead out bushings. The hole for the pushrod are left out so you can place them where you need them. Dubro 1/16" ball links work best for a pushrod connector.
Thanks Steve
T-11 9 X 3 1/2 Grish/Tornado
B-7 9 1/2 X 4 Bolley
S-4 10 5/8 X 4 1/4 Modusa
S-6 11 X 5 1/4 Modusa
S-7 11 3/8 X 5 1/4 Modusa
S-8 11 3/4 X 6 Modusa
S-9 13 X 5 1/4 Modusa
S-10 13 X 6 Modusa
T3-1 10 X 3 1/2 Grish/Tornado
Gerald Schamp:
Hi Steve,
I am looking for some carbon fiber landing gear for profile models. I understand that you make or have these. Would you email me at: geraldschamp@comcast.net and let me know. Walter Hicks told me about these.
Thanks,
Gerald Schamp
Steve Wilk:
Hi Gerald
I do have have landing gear for a Profile Stunter P-40 class. I've attached a coulpe of pics
unfinished finished
CF Profile Stunt LG $25.00 $30.00
CF Profile Stunt LG w/CF Cloth $30.00 $35.00
Steve
swilk117@yahoo.com
Navigation
[0] Message Index
[#] Next page
Go to full version