Vendors Corner > Core House
Lil' Hacker availability
(1/1)
John Paris:
Phil,
Do you have any Lil' Hacker kits available? Also any samples of SLC still available?
Thank you,
John
phil c:
We are officially out of SLC until further notice. I found a company to deal with but they are closed for the flu. So nothing until maybe in the fall. Otherwise it depends mostly on whether or not I want to spend the bucks. It's going to take a looong time to sell out.
The Li'l Hacker II is still available. $40 plus shipping. They have to be shipped individually because of postal balloon charges.
John Paris:
Phil,
Is there much difference between the original Lil Hacker and the Hacker II? Is covering included in the kits? How much is shipping? Lots of questions.... I have had good luck with electrifying one of the originals and there is some interest in duplicating this set up.
Thank you,
John
phil c:
--- Quote from: John Paris on March 23, 2020, 06:46:32 PM ---Phil,
Is there much difference between the original Lil Hacker and the Hacker II? Is covering included in the kits? How much is shipping? Lots of questions.... I have had good luck with electrifying one of the originals and there is some interest in duplicating this set up.
Thank you,
John
--- End quote ---
Hi John,
The Li'l Hacker II is the same as the origina, but the wing was made about 1/4in. thicker to make it stiffer. It flys better
Since we're out of covering we can't put it in the kit, Sorry. Look for model covering on Ebay. $13/5 meters x .6m
I've electrified the Li'l Hacker II and have an alternate front end available. I'll be checking with Brodak's if they can laser cut more(cutter died a long time ago!). The change over used a Hobbyking Turnigy 28-24(22-12 actual) 1600 Kv motor, a 7/5e APC prop, 25 amp Castle controller, and a 3S 1000mA battery. Control was with a cheap 3 channel car transmitter.
Running flat out is would run about 3 minutes. Judicious use of the throttle would go 3.5-4min.
Shipping depends on zip code. It varies from about $9 to $14.
Phil Cartier
couldn't get a picture to go through. oh well.
Navigation
[0] Message Index
Go to full version