stunthanger.com
Vendors Corner => Core House => Topic started by: phil c on November 13, 2019, 04:27:57 PM
-
I've also run into problems with the Post Office and UPS and the size of the current box that handles 4 sets of any of the cores I've worked up except for the Giles and other wings with over a 13in. chord. An eighth inch difference, just from how the box folds, can knock the price from $10 to $70!
So, I can size a custom box which will fit everything under a 13in. chord and cost something like $4.50 a piece. That would up the cost of all the Quad wing types about $6 to, say $50.
The single sets would still be $15 since they use a 24 x 14 box already.
The alternate is a stock box, specifically one that is 24 x 14 x 12. It will only cost $2.45 but it will hold even larger wings if needed. It would hold 3 sets of cores with the price $35
Please let me know what you think. Post a reply here or email me direct.
Thanks,
Phil Cartier
717-566-3810
philcartier@earthlink.net you can use the email button in this program. It goes to the same address.
-
- I don't buy many of your cores (and I won't until my wife graduates from college and starts flying again -- then I'll need some), so weigh my answer accordingly
- $35 divided by three cores is $11.67 per core
- $50 divided by four cores is $12.50 per core
- I'm a cheap ****, so I'd go with the lower initial cost and less per-piece price any day
Edit: And I understand that you're at the mercy of the shipping box people and the post office and UPS -- that's a given. Unless your name is Bezos you just take the deal they give you.