stunthanger.com
Speed,Combat,Scale,Racing => Combat => Topic started by: dave siegler on July 22, 2017, 08:28:20 AM
-
first try at using sleeves on spectra line.
Use para cord 75, single inner strand
use about 6 inches to make a loop, remove the central strand
use small diameter wire doubled over to feed the line through. I used copper wrapping wire
heat sear the ends of the para cord. or they unravel. A good time is while the wire is in the casing.
Pull the spectra through the para cord and tie a figure 8 knot.
scientific tests coming in a week or so. Oshkosh is next week.
Initial pull tests opened up a line clip, so it looks good. I need to borrow a pull test scale.
-
this is the para cord with the inner being pulled out.
-
first try at using sleeves on spectra line.
Use para cord 75, single inner strand
use about 6 inches to make a loop, remove the central strand
use small diameter wire doubled over to feed the line through. I used copper wrapping wire
heat sear the ends of the para cord. or they unravel. A good time is while the wire is in the casing.
Pull the spectra through the para cord and tie a figure 8 knot.
scientific tests coming in a week or so. Oshkosh is next week, so I will be busy.
Initial pull tests opened up a line clip, so it looks good. I need to borrow a pull test scale.
-
Any kind of braided, hollow fishing line in the 50-100lb test range will work the same way. Power Pro and a couple others are now offering hollow Specta line.