Link 1
Stunt Hangar YouTube
P.A.M.P.A.
AMA
Balsa Density Calculator
This topic
This board
Entire forum
Google
Home
Help
Tags
Advertise
Login
Register
News:
June 15, 2024, 04:32:10 PM
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
stunthanger.com
»
Speed,Combat,Scale,Racing
»
Combat
(Moderator:
Paul Smith
) »
Johnson help
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: Johnson help (Read 1021 times)
Marvin Denny
Trade Count:
(
0
)
Captain
Posts: 889
Welcome to the Stunt Hanger.
Johnson help
«
on:
March 23, 2011, 02:11:28 PM »
I would like to get some help identifying a Johnson CS shaft. not the BB, just the standard CS. I would also like to get a thrust washer for an old small case Johnson. It is the one with a "D" shaped hole. Not the compression cone. I am sorting out my Johnson parts.
Bigiron
Logged
marvin Denny AMA 499
Greg McCoy
Trade Count:
(
0
)
Commander
Posts: 168
flying tiger B24 gunnery school patch Laredo
Re: Johnson help
«
Reply #1 on:
March 23, 2011, 04:47:52 PM »
Marvin I have this random thrust washer I don't know where it came from.
diam ID .346, .317 at the flat. .873 OD
.340 thick on the raised ring on back, .322 thick below the ring.
It looks like this, and even has the slight taper on the edge of the flange.
http://modelenginenews.org/cardfile/images/jbb_drivers.jpg
«
Last Edit: March 23, 2011, 06:06:51 PM by Greg McCoy
»
Logged
AMA 77370
Marvin Denny
Trade Count:
(
0
)
Captain
Posts: 889
Welcome to the Stunt Hanger.
Re: Johnson help
«
Reply #2 on:
March 23, 2011, 07:38:58 PM »
Nope Greg, That one is about 0.010 inch too big in the ID at both places, and 0.020 inch too thick.
That one probably is for a later model than mine
Thanks for looking.
Bigiron
Logged
marvin Denny AMA 499
Advertise Here
Print
Pages: [
1
]
Go Up
« previous
next »
Tags:
stunthanger.com
»
Speed,Combat,Scale,Racing
»
Combat
(Moderator:
Paul Smith
) »
Johnson help
Advertise Here