stunthanger.com

Speed,Combat,Scale,Racing => Combat => Topic started by: john e. holliday on March 18, 2017, 11:49:29 AM

Title: Help needed for Nosecone
Post by: john e. holliday on March 18, 2017, 11:49:29 AM

I won the Nose Cone combat kit that was on ebay a few months back thinking I could replicate the kit.  After doing built up leading edges for Ringmaster S-1's this one was going to be a cinch.  Bout the kit had several sheets of woods missing that had a couple of center ribs and the parts for the engine mounting.   The plans do no show a side view.  Anybody out there have the parts they could trace.   I will gladly pay for any expense.  

My address is below and yes I broke another record today.

Title: Re: Help needed for Nosecone
Post by: Ken Burdick on March 19, 2017, 07:50:11 AM

Here ya go John.
http://www.controllineplans.com/frameset2.htm

Barry Baxter has the super nose cone so you should be all set.

K

Title: Re: Help needed for Nosecone
Post by: john e. holliday on March 19, 2017, 02:53:48 PM

Thank you I for got about the Super on Nose Cone.  Plans are ordered and paid for. H^^