stunthanger.com
Speed,Combat,Scale,Racing => Combat => Topic started by: Motorman on May 08, 2020, 08:48:55 PM
-
blank
-
Brian Gardner made some ABC sets
-
Brian has made many Non Baffle piston liner sets, both laminar flo and schnuerle port. Not sure about specifically for the G21.35 which is the same pist/liner/head as the 35C combat version
-
I did a run of the flat top sets many years back.
I'm doing a new run of them this year.
Brian
-
MM, Not sure that one would fit in All of the cases which would limit it's marketability?
-
The last time I did them it was the square exh port and no perry ports. But it was so long ago I don't have the details anymore. So I have some sample motors coming, but I don't know what version they are yet.
Brian
All of the Supertigre 35 Piston/sleeve/rod will fit in any of the Supertigre 35 cases.
Motorman 8)
-
I received the sample motors today and can confirm the G21/35 is the oval exh port and perry ported. So that is what I'll make.
I'll also do some heads to take Nelson plugs.
Usual deal - send me pm's to get your name on the waiting list for them and to ensure I make enough of them..
Brian
-
For everybody on the waiting list for these - they will be ready soon. Not forgotten, just my backlog of projects has become very long.
-
Brian could you put me on the list for three sets please.
-
Done Gordon.
Only problem is your 3 makes the list 40 and I have only made 35 (list has grown since I started them & too late to add extras)
But the list is so old some people may no longer want their order. (and I think I recall seeing that one has passed away)
But you are on the list mate.
Brian
Brian could you put me on the list for three sets please.
-
Brian,
If you happen to have any cancelations I'd be in for two sets with heads.
Tim
-
I've added you to the list (pending cancellations)
The heads are for Nelson plugs. Not done those yet so I can make extras if people want them.
Brian
Brian,
If you happen to have any cancelations I'd be in for two sets with heads.
Tim
-
Yes on Matching heads please.
-
Copy that
Yes on Matching heads please.
-
I have a number of Nelson Plug Double Bubble head button & clamp ring sets left from this production run. The buttons suit high nitro use. PM me if you would like some.
-
Hello Brian
Any chance for a rerun of the G21/35 piston liners again?
Your piston liner sets and parts are most appreciated!
A lot of dead engines get to live again
Thanks
Regards Gerald
-
Hi Gerald,
I've just recently finished shipping out the last production run. I do have some high nitro double bubble heads left though.
I can start a new waiting list for another run - but it would be next year before I get to it.
Brian
Hello Brian
Any chance for a rerun of the G21/35 piston liners again?
Your piston liner sets and parts are most appreciated!
A lot of dead engines get to live again
Thanks
Regards Gerald
-
Hi Brian
It would be great if you could make another run of them even if there is a bit of a wait.
I need at least 1 but am sure there will be plenty of takers out there as combat engines get a hard life giving us fun.
Did you ever make ABC sets for the G21/46 stunt engines as they seem an obvious candidate as some have ring issues?
Thanks again
Regards Gerald
-
I can start a new waiting list for another run of G21/35 combat sets.
ST46 I have done many production runs of those.
Brian
Hi Brian
It would be great if you could make another run of them even if there is a bit of a wait.
I need at least 1 but am sure there will be plenty of takers out there as combat engines get a hard life giving us fun.
Did you ever make ABC sets for the G21/46 stunt engines as they seem an obvious candidate as some have ring issues?
Thanks again
Regards Gerald
-
Hello Brian
Thanks, I can conform I wish to buy two G21/35 sets to get the ball rolling.
Regards Gerald
-
OK, new list started.
Brian
Hello Brian
Thanks, I can conform I wish to buy two G21/35 sets to get the ball rolling.
Regards Gerald