News:


  • March 28, 2024, 04:50:52 AM

Login with username, password and session length

Author Topic: Fox 36X ABC sets  (Read 4762 times)

Offline Brian Gardner

  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 455
Fox 36X ABC sets
« on: September 16, 2019, 02:01:50 AM »
I still have a few Fox 36X abc piston/liner/rod/pin sets from the last production run fellas.

PM me if you would like a set. Or email briangardner_b1@yahoo.com.au

Brian

Offline Chuck medeiros

  • Trade Count: (0)
  • New Pilot
  • *
  • Posts: 1
Re: Fox 36X ABC sets
« Reply #1 on: January 12, 2020, 05:51:33 PM »
Do you have any 36X p/liners left?

Online C.T. Schaefer

  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 710
Re: Fox 36X ABC sets
« Reply #2 on: January 15, 2020, 05:57:31 AM »
Brian, We have found that this P/C is the best way to rejuvenate the 36x. They will also fit other Fox .36 motors as well as all of the earlier .35 Combat Specials. Barring any unfortunate 'hard landings' they will out live us!  Cheers, TS.

Offline Michael Foster

  • Trade Count: (0)
  • New Pilot
  • *
  • Posts: 17
Re: Fox 36X ABC sets
« Reply #3 on: January 18, 2020, 06:44:10 AM »
I have reserved 3 P & L sets for the 36X from Brian Gardner.

Everyone needs to let him know if you want some so he can make another batch.

I have them & they work very well.

Mike


Offline Brian Gardner

  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 455
Re: Fox 36X ABC sets
« Reply #4 on: January 21, 2020, 08:28:11 PM »
I have had enough people ask me for sets to justify another small production run of them.

Anybody wanting them needs to send me a PM.  I don't check the forums often, but I get email notifications for PM's.

Brian

Offline bob whitney

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 2244
Re: Fox 36X ABC sets
« Reply #5 on: January 22, 2020, 05:14:24 PM »
I will try it again Bob
rad racer

Offline Brian Gardner

  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 455
Re: Fox 36X ABC sets
« Reply #6 on: January 24, 2020, 12:59:17 AM »
I've added you to the list Bob.

There is enough people on the list for me to do a small run of 15 sets. I normally prefer 20+ though.  I'll get the ball rolling.

Brian

Offline Brian Gardner

  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 455
Re: Fox 36X ABC sets
« Reply #7 on: March 10, 2021, 04:17:57 PM »
I'll have another run of these ready at the end of the month and will start contacting everyone on the waiting list soon.

Brian

Offline Dick Tyndall

  • 23 supporter
  • Trade Count: (0)
  • Lieutenant
  • *
  • Posts: 91
Re: Fox 36X ABC sets
« Reply #8 on: April 06, 2021, 01:24:33 PM »
   I just received my Fox 36X piston/cylinder/ rod/wrist pin set in the mail. This is my second set that I have bought from Brian. With me being a machinist by trade, I cannot stress enough the beautiful, accurate craftsmanship that this person puts into his work. Thank you Brian, for making the parts for the engines that we love and don't want to leave them on the shelf to look at.

                   Dick Tyndall

Offline Michael Stinson

  • Trade Count: (0)
  • Ensign
  • **
  • Posts: 43
Re: Fox 36X ABC sets
« Reply #9 on: July 24, 2021, 07:06:28 PM »
Brian,

I know this is a little late, but do you have any left of the Fox 36X?

Mike Stinson


Offline Brian Gardner

  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 455
Re: Fox 36X ABC sets
« Reply #10 on: July 30, 2021, 06:42:41 PM »
I have a dozen left mate.

Brian

Brian,

I know this is a little late, but do you have any left of the Fox 36X?

Mike Stinson

Offline Dennis Toth

  • 2020 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 4208
Re: Fox 36X ABC sets
« Reply #11 on: August 28, 2021, 07:05:42 AM »
What prop are you guys using with the BG ABC 36X setups? How are you setting it at launch?

Best,   DennisT

Offline Tom Luciano

  • 24 supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 888
Re: Fox 36X ABC sets
« Reply #12 on: August 28, 2021, 12:57:05 PM »
Dennis,
  Depends on the application and crank work. Al Ferraro and Tom Schaefer get tremendous performance out of theirs. They use Scarinzi's timing from the Blitz article. They are also protege's of Larry's. Best speed performance is with an 8x8 APC. Depending on Nitro content I have used a 9x6, 8x6, 8x7, and 8x8. we used to use Top Flite 9x7 wood years ago as well. Usually launching slightly rich and letting it unload in the air. I've added a video of me flying my Super Satan at 118 mph on 10% powermaster. Also look for Al hitting 129mph on my you tube page.


AMA 13001

Offline Tom Luciano

  • 24 supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 888
Re: Fox 36X ABC sets
« Reply #13 on: August 28, 2021, 01:03:32 PM »
AMA 13001

Offline Tom Luciano

  • 24 supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 888
Re: Fox 36X ABC sets
« Reply #14 on: September 20, 2021, 12:39:45 PM »
Brian 
I'll take two more. I'll pm you as well.

Tom
AMA 13001

Offline Brian Gardner

  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 455
Re: Fox 36X ABC sets
« Reply #15 on: September 22, 2021, 06:57:32 PM »
6 sets left fellas

Brian

Offline kevin king

  • 24 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1525
Re: Fox 36X ABC sets
« Reply #16 on: November 11, 2021, 11:17:54 AM »
I have a dozen left mate.

Brian
Brian how much are they?
kevin

Offline Brian Gardner

  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 455
Re: Fox 36X ABC sets
« Reply #17 on: November 11, 2021, 04:08:48 PM »
All sold out now.

I can begin a new waiting list, but I'm not sure there will be enough demand to get the numbers required for a production run.

Brian

Brian how much are they?
kevin

Offline Brian Gardner

  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 455
Re: Fox 36X ABC sets
« Reply #18 on: November 14, 2021, 03:46:07 AM »
I did a small run of Fox 35 sets with 36X timing - maybe you have one of those?

Both the 36X and 35 have a single exh port.

Brian

Correct me if I'm wrong but can you take the Gardner Fox 35 ABC and raise the exhaust to get the same product as the 36X. Or does the Gardner 36X have 2 exhaust ports? Maybe I'm confused because I have what I think is a 36x abc in my Fox 35 speed engine and it's just a Fox 35 sleeve with a raised exhaust.

Motorman 8)

Offline Dave Rigotti

  • 24 supporter
  • Trade Count: (0)
  • Commander
  • *
  • Posts: 343
  • "Electric...The future of anytime stunt"
Re: Fox 36X ABC sets
« Reply #19 on: November 14, 2021, 06:26:24 AM »
Any more of these on the "schedule?"

I did a small run of Fox 35 sets with 36X timing - maybe you have one of those?

Both the 36X and 35 have a single exh port.

Brian
Dave Rigotti
AMA 66859
Chesterland, Ohio

Offline Al Ferraro

  • 24 supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 576
Re: Fox 36X ABC sets
« Reply #20 on: November 15, 2021, 07:58:04 AM »
 Brians 36x has a larger baffel (wider and higher) and located more to center on the piston than th 35 Stunt. The exhaust port are cut smaller and lower on the Stunt set so you would get SPI using it with a 36x crank. Also the intake port is also much smaller, lower and not as wide as the 36x .
Al
« Last Edit: November 15, 2021, 02:48:21 PM by Al Ferraro »

Offline Brian Gardner

  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 455
Re: Fox 36X ABC sets
« Reply #21 on: November 26, 2021, 02:22:11 PM »
Not planned, and not for blacklisted people

Any more of these on the "schedule?"

Offline Gordan Delaney

  • 24 supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 401
Re: Fox 36X ABC sets
« Reply #22 on: November 29, 2021, 04:49:45 PM »
6 sets left fellas

Brian
BRIAN I`LL TAKE A SET OF THE 36X SEND ME A PAY PLAN.Thank you

GORDAN  DELANEY

gordandelaney@yahoo.com

Offline Brian Gardner

  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 455
Re: Fox 36X ABC sets
« Reply #23 on: November 30, 2021, 04:27:24 PM »
All sold out sory Gordon. I've started a waiting list for another run. But I'm so far behind and backlogged I don't see another run of these happening until late next year.

I can add you to the waiting list if you want.

Brian

BRIAN I`LL TAKE A SET OF THE 36X SEND ME A PAY PLAN.Thank you

GORDAN  DELANEY

gordandelaney@yahoo.com

Offline phil c

  • 21 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2480
Re: Fox 36X ABC sets
« Reply #24 on: December 01, 2021, 01:33:51 PM »
I'll have another run of these ready at the end of the month and will start contacting everyone on the waiting list soon.

Brian
Hi Brian- this having been a very bad year, I can't remember if I asked for 1 or 2 ABC 36X  assemblies.  I do have a couple of engines to put them in.  If you can accommodate I'd appreciateit.

Phil Cartier
phil Cartier

Offline Brian Gardner

  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 455
Re: Fox 36X ABC sets
« Reply #25 on: December 01, 2021, 03:56:54 PM »
Hi Phil, After not hearing back from you and learning you were unwell I didn't keep any for you. I'll add you to the list for the next run, but as mentioned above I'm so far behind it won't be till late 2022.

Brian

Hi Brian- this having been a very bad year, I can't remember if I asked for 1 or 2 ABC 36X  assemblies.  I do have a couple of engines to put them in.  If you can accommodate I'd appreciateit.

Phil Cartier

Offline Gordan Delaney

  • 24 supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 401
Re: Fox 36X ABC sets
« Reply #26 on: December 01, 2021, 10:19:54 PM »
All sold out sory Gordon. I've started a waiting list for another run. But I'm so far behind and backlogged I don't see another run of these happening until late next year.

I can add you to the waiting list if you want.

Brian
Yes, Brian put me on the list.
Thanks
Gordan


Advertise Here
Tags:
 


Advertise Here