List updated Phil.

These and the ST35 will be getting priority after the current run of 160 x OS61VF are done.

Brian

I've been asked again if I would do a run of Fox 36 Mk 4-5.

Again, I'm happy to do these if there are enough numbers. WE HAVE ENOUGH NUMBERS

They will be stock Mk V timing and include piston/liner/rod/pin/head shims/backplate gasket.

Also doing Tyndal double bubble head buttons to suit stock long reach plugs, and also Nelson head buttons. So let me know if you want either or both.

Piston/liner/rod/pin/shim sets will be approximately $115 to $125 Australian dollars. Don't know what the head buttons will be $.




Brian

i=
I'd like 2(two) piston liner assemblies and 2 of each head: Tyndal long reach,  Nelson plug version

Thanks Brian
Phil C

Hello

Nice to know you are still making Fox 36 parts but wonder will mk4 and 5 sets fit a mk6?
If the Mk 6 is different is it a possible for the future?
Thanks
Regards Gerald

Hello Brian

Thanks for your reply , it would be great if we could get some Mk6 P/C sets made , how many orders would you need?

Think the Mk6 was steel on the very early ones but most were ABC , while the Mk7 was only AAC but had problems so people retrofitted the ABC sets from the Mk6.

 Regards Gerald Wimmer