Personally, I don't see the need to make any head inserts for the Nelson plugs. Back in the day when I was making these inserts and flying Fast Combat I was using Rossi R-5 long glow plugs with 30% nitro fuel with Fox MK III's on 19 ounce foam wing airplanes and running 122 MPH. The plugs held up fine . The Rossi plugs are available from Alan Hobbs who lives in Montana. I believe the R-5's are $4.00 each. I don't think you would see much, if any performance gain by using the Nelson plug. Just my opinion.

              Dick Tyndall

Good to know

Was just thinking my Nelsons & Fora's use Nelson & I have a huge pile of them

Mike

People have asked for both the Tyndal double bubble head button and also Nelson. So I will do both.

So those that want head buttons need to let me know which type and how many to add to the list.

Brian

Quote from: Brian Gardner on March 13, 2020, 09:49:24 AM
People have asked for both the Tyndal double bubble head button and also Nelson. So I will do both.

So those that want head buttons need to let me know which type and how many to add to the list.

Brian

3 Nelson head buttons

I would be in for 6 nelson heads

Mike

Guys, Do you want laser cut backplate gaskets too?

Brian

Quote from: Brian Gardner on March 23, 2020, 11:19:08 PM
Guys, Do you want laser cut backplate gaskets too?

Brian

.


Yes

 2 piston & liner sets, 4 Nelson heads, and 10 Gaskets .
Thanks Al

Copy that Al

Brian

Quote from: Al Ferraro on May 02, 2020, 07:13:35 PM
2 piston & liner sets, 4 Nelson heads, and 10 Gaskets .
Thanks Al

I will order 2 P/L's, 3 Nelson head buttons, 6 gaskets. 

Guys, this (and all my other projects) has been delayed due to Covid19 issues. But things are back to normal and the ball will start rolling.


I have some drawings etc for the Nelson plugs, but what is the thread?

Quote from: Brian Gardner on October 04, 2020, 05:25:14 PM
Guys, this (and all my other projects) has been delayed due to Covid19 issues. But things are back to normal and the ball will start rolling.


I have some drawings etc for the Nelson plugs, but what is the thread?

Pretty sure it is 11/32 - 32 UNEF

Please post the US pricing for the Fox piston, liner and rod sets.

Isn't the Mark VI a different part set form the Mark III, IV, and V?

Please see the edited first post in this thread.

Quote from: Paul Smith on October 05, 2020, 06:16:32 AM
Please post the US pricing for the Fox piston, liner and rod sets.

Isn't the Mark VI a different part set form the Mark III, IV, and V?

Brian, please put me down for two sets, done long reach and 1 Nelson plug head.

Done Phil

These are just starting to kick off. Covid19 has put me way way behind this year

Brian

Quote from: phil c on November 16, 2020, 06:20:11 PM
Brian, please put me down for two sets, done long reach and 1 Nelson plug head.

Finally getting started on these.

Sorry its been such a delay. Covid19 has pretty much put things a year behind.

Not forgotten or dead in the water guys. Just progress is slow.

Brian

Quote from: Brian Gardner on October 05, 2020, 04:17:18 PM
Please see the edited first post in this thread.

Brian, I wanted the Fox m2 piston and liner sets, But I don`t see my name on the list above. Don`t know why,
but still want a set.

Thank You
Gordy

gordandelaney@yahoo.com

I've added you to my list Gordon.

Brian

Quote from: Gordan Delaney on June 11, 2022, 08:59:20 PM
Brian, I wanted the Fox m2 piston and liner sets, But I don`t see my name on the list above. Don`t know why,
but still want a set.

Thank You
Gordy

gordandelaney@yahoo.com

Hi Brian,
    I probably mentioned this in an email or a letter, but put me down for (2)Fox MK 3-4 ABC P&L sets with the Tyndall double bubble head inserts for the standard long glow plugs.
   I hope things are going well with you.

                       Dick Tyndall

Hi Dick,

Yes, I have you on the list.

I am way way behind on projects. Between shipping problems due to covid last year and the invasion of Ukrain this year material supply has been a problem. Things are moving again now but my backlog has become outragious.

I apologise for the delay on all my projects.

Brian

Quote from: Dick Tyndall on June 20, 2022, 08:53:20 AM
Hi Brian,
    I probably mentioned this in an email or a letter, but put me down for (2)Fox MK 3-4 ABC P&L sets with the Tyndall double bubble head inserts for the standard long glow plugs.
   I hope things are going well with you.

                       Dick Tyndall

Quote from: Brian Gardner on July 18, 2022, 05:09:02 PM
Hi Dick,

Yes, I have you on the list.

I am way way behind on projects. Between shipping problems due to covid last year and the invasion of Ukrain this year material supply has been a problem. Things are moving again now but my backlog has become outragious.

I apologise for the delay on all my projects.

Brian

    Keep up the great work Brian! I don't need any of the Foix Combat stuff, but will keep my ears open to anything else you may be cooking up as you get caught up.
    Type at you later,
     Dan McEntee

Brian,
Fantastic to see you are getting some P/L'ers and related stuff made and out.  Congrats!  I'll pm you a quick question and then hope to talk to you via phone.

Thanks,
Lane Puckett

I've been asked again if I would do a run of Fox 36 Mk 4-5.

Again, I'm happy to do these if there are enough numbers. WE HAVE ENOUGH NUMBERS

They will be stock Mk V timing and include piston/liner/rod/pin/head shims/backplate gasket.

Also doing Tyndal double bubble head buttons to suit stock long reach plugs, and also Nelson head buttons. So let me know if you want either or both.

Piston/liner/rod/pin/shim sets will be approximately $115 to $125 Australian dollars. Don't know what the head buttons will be $.




Brian
[/quote]
i=
I'd like 2(two) piston liner assemblies and 2 of each head: Tyndal long reach,  Nelson plug version

Thanks Brian
Phil C