Author Topic: Gotcha Att: Phil C (Read 850 times)

Gordan Delaney · « **on:** August 11, 2012, 02:54:39 PM »

Phil,
Glen Dye gave me a Gotcha. Pre- assembly done. But looking at it I noticed no push rod. Whats the trick for putting in the push rod with out cutting into it. Or is that what I`m suppose to do?
I did one about twenty years ago.Don`t remember though.

Could use your help.

Thanks
Gordy

phil c · « **Reply #1 on:** August 11, 2012, 08:20:33 PM »

The bellcrank is supposed to be mounted inside
on the boom. You'll have to cut slot in the top of the wing and look. If it's there melt a slot for the pushrod. Install the pushrod with a dogleg so it can be twisted in to like anF2D.

Gordan Delaney · « **Reply #2 on:** August 13, 2012, 08:08:42 AM »

Phil,

Thank you for your help.

Gordy

Author Topic: Gotcha Att: Phil C (Read 850 times)

Gordan Delaney

Gotcha Att: Phil C

phil c

Re: Gotcha Att: Phil C

Gordan Delaney

Re: Gotcha Att: Phil C