stunthanger.com

General control line discussion => Classifieds => Topic started by: Lyle Spiegel on May 03, 2023, 06:50:15 PM

Title: WTB Tamigo Trainer / plans or kit.
Post by: Lyle Spiegel on May 03, 2023, 06:50:15 PM

WTB Mike Hoyt amigo Trainer / plans or kit.

Title: Re: WTB Tamigo Trainer / plans or kit.
Post by: john e. holliday on May 03, 2023, 08:42:13 PM

I checked the AMA plans site and they don't show it.  Was this a magazine plan? D>K

Title: Re: WTB Tamigo Trainer / plans or kit.
Post by: Carl Cisneros on May 07, 2023, 12:15:28 PM

IF memory serves, the Tamigo was only availabe as a kit from Mike.
If you do happen upon a kit, when building it, raise the tail pipe aprox. 3/32" HIGHER than the metering jet center line.
This is where we found the plane tracks nice and level with out much at all control input.
That is the jet I learned on back in '74.
with tied lines (made illeagle after that summer, or was it '74?), I got mine up into the low 170's. Normal speed is around 140 plus depending on fuel/air/model set up.
(if flying with 2 lines)
Then I went on to the Sidewinder and then Ironsides.

Carl Cisneros

Title: Re: WTB Tamigo Trainer / plans or kit.
Post by: Dave Rigotti on May 07, 2023, 12:31:30 PM

Do you want this for simply sport flying?

Here's a MUCH better choice for a Dyna-Jet powered plane. It's "almost" an ARF.  Will do 135-140MPH.

https://pylon-line.myshopify.com/collections/control-line-parts/products/robert-bolton-t34-sport-jet-kit.  While your at it...get the 12 hole flowjector and ditch the DJ one.