stunthanger.com
General control line discussion => Classifieds => Topic started by: Roger_Pion on September 06, 2022, 06:43:17 PM
-
Looking for OS old part #2305. Rod has .25” big end hole and 5.5mm small end, for old-style MAX-H with smaller bypass. It’s the same size as the MAX-S rod except the small end 5.5 mm hole.
I read that someone made some that were bushed or real hard aluminum and I need a new one for my MAX-H S. PM if you know who might can help.
thanks!
-
Are you sure your part # is correct? I have a rod in the package that says it is for the 40SP, 40P,40R, and 40S and that part # is 24105008. Part # 23005007 is for the 35S among others. I'm confused. Which are you looking for?
-
Thanks Steve, I was never able to cross the old part # with the number you wrote, 24105008. So that helps.
You wouldn't be interested in selling that rod would you?
-
I think I understand now. Your part number had me confused for a moment. Yes, I would sell it. Let's take this to private message. I'll get back with you when I figure the cost. I would buy a little bubble mailer to send it. Give me a day or so.
-
As far as I know, nobody made aftermarket rods for the 40H series, just the 35S.
-
As far as I know, nobody made aftermarket rods for the 40H series, just the 35S.
Yes, I figured as much. BUT I also thought that maybe a machinist talented enough to make such rods would also be talented enough to ream the small end hole on one of them to 5.5mm so I'm still hopeful...
-
That makes sense.
-
Just to further confuse the issue VD~ , the 2305 IS the number listed in the parts page for the 40 Con rod .in the instructions supplied with the engine .
Theres NONE here , but theres several OTHER O S , like LA & FP , if anyones gotta con rod problem .
https://www.rcjapan.net/index.php?main_page=index&cPath=80_413_432
Sounds like the Right Rods in the bank , there . Thinking the Max 35 C would be a fit . theres a R C version too . Single Ball race , case like the 40 S & P , SP etc .
INCIDENTLY the H - 29 R con rod , wrist pin , piston & liner ARE max 30 S parts , or V c V if the 29R & 35 C came FIRST . :P