stunthanger.com

General control line discussion => Classifieds => Topic started by: Motorman on August 17, 2022, 07:48:31 PM

Title: Wanted Rev-Up 9x4 Wood
Post by: Motorman on August 17, 2022, 07:48:31 PM

I'm looking for a Rev Up 9x4 wood prop. Can be new, old, beat up, broke in half, oil soaked hub ect. doen't matter as long as it's not shortened too much or re-carved or twisted.

I use paypal, cash, check, I have lots of props if you want to trade for something or I can pay cash.

Thanks,
Motorman 8)

Title: Re: Wanted Rev-Up 9x4 Wood
Post by: 944_Jim on August 17, 2022, 08:51:53 PM

MM,
I'm curious...you have such a wide range of acceptable physical conditions that I wonder if you are planning on molding your own.

I'll look in my stash tomorrow late afternoon after work. If someone beats.me, I'll still be curious!

Title: Re: Wanted Rev-Up 9x4 Wood
Post by: Motorman on August 17, 2022, 09:52:02 PM

Yes, I would be using it to make a pattern for a mold. Ideally a prop that is useable would be best. The Rev Up line runs a little light on pitch so, I think it would be a good prop for my LA25 on the Ringmaster.   

Thanks,
Motorman 8)

Title: Re: Wanted Rev-Up 9x4 Wood
Post by: 944_Jim on August 18, 2022, 08:06:20 PM

Sorry MM,
I have TopFlite Super-M and Power Point, and Zinger. No Rev-Ups.

Title: Re: Wanted Rev-Up 9x4 Wood
Post by: Motorman on August 18, 2022, 08:42:30 PM

Thanks for looking.

Title: Re: Wanted Rev-Up 9x4 Wood
Post by: C.T. Schaefer on August 19, 2022, 03:41:21 AM

Call Brodak?  They have a bunch of rev ups not in the catalog.

Title: Re: Wanted Rev-Up 9x4 Wood
Post by: greg meyer on August 19, 2022, 04:36:43 PM

Have what your looking for 9 4 rev up very nice con. 5.00 plus postage
Let me know greg

Title: Re: Wanted Rev-Up 9x4 Wood
Post by: Motorman on August 22, 2022, 08:47:27 PM

Got what I was looking for, thanks guys.

Title: Re: Wanted Rev-Up 9x4 Wood
Post by: Lyle Spiegel on August 24, 2022, 10:41:46 AM

I have Ring setup with OS35S, would the prop you are going to mold work well?

Title: Re: Wanted Rev-Up 9x4 Wood
Post by: Motorman on August 24, 2022, 11:01:59 AM

I believe that engine would work best with a 9 x 6.