stunthanger.com
General control line discussion => Classifieds => Topic started by: Andrew Hathaway on February 26, 2020, 11:00:46 PM
-
I need a Macs 2650 header. It's the one that fits the OS 35/40 FP, 40/46LA, 25-32F, Magnum 36, etc. I don't need the fancy ? shaped wrap around, just the regular old plain Jane header. Needs to be full length, not cut short. Needs to be the above part # to fit the already finished model.
Thanks!
(https://www.mecoa.biz/tn/mac/sidehdr-std-150.jpg)
-
Andrew I might have a header, will check
-
Sorry Andrew my pipe has more bends than your picture.
-
Thanks for checking! I appreciate it.
-
Check with Randy Smith at Aero Products
-
Thanks for the suggestion. I checked with Randy Smith, 4 years ago to the day, he didn't have that specific header available.
-
Thanks for checking! I appreciate it.
I found this in my stash on a NIB LA-$0
-
That looks like it might be the one. The one I'm after is a 3/4" tube, with the "standard" drop, which puts the bottom edge of the tube about 2" from the exhaust flange.
(http://www.mecoa.com/acc/pipes/mac/headchrt.jpg)
-
Standard email me