stunthanger.com

General control line discussion => Classifieds => Topic started by: Avaiojet on January 27, 2022, 10:30:08 AM

Title: WANTED!! Recessed Prop Nut.
Post by: Avaiojet on January 27, 2022, 10:30:08 AM

I need what you see in this photo, not the extension, but the prop nut.

Threads have to be 6 x 1.0 and the recessed part is 3/8.

If not available, possibly I could have one made. Yes! I tried TruTurn.

Thanks in advance.

Charles

Title: Re: WANTED!! Recessed Prop Nut.
Post by: bill bischoff on January 27, 2022, 07:21:59 PM

McMaster Carr threaded female hex standoff. M6x1 thread, 25 mm long, 13mm hex. Turn one end down to 3/8" round. Of course you didn't say what thread you need on the other end.

Aluminum #95947A561  $3.49
Steel        #91920A723  $4.89

Or, Jim Lee can make you whatever you want.

Title: Re: WANTED!! Recessed Prop Nut.
Post by: Perry Rose on January 28, 2022, 05:34:17 AM

Jim Lee at Lee Machine Shop can make anything.

Title: Re: WANTED!! Recessed Prop Nut.
Post by: Avaiojet on January 28, 2022, 08:57:13 AM

Thank you gentleman for your replies, I got this done.

Charles