News:


Advertise Here

  • September 28, 2021, 11:21:52 AM

Login with username, password and session length

Author Topic: Stuka Stunter - Don Still design - RSM kit  (Read 1209 times)

Offline Bruce C. Cunningham

  • Trade Count: (0)
  • New Pilot
  • *
  • Posts: 6
Stuka Stunter - Don Still design - RSM kit
« on: June 13, 2021, 06:15:40 PM »
Unopened, NIB, OTS legal. $139.00 total shipped to lower 48.
Contact through Stunt Hangar or email.
Cunninghamb@airborn.com
Thanks,
Bruce Cunningham

Offline Dalton Hammett

  • 21 supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 545
Re: Stuka Stunter - Don Still design - RSM kit
« Reply #1 on: June 14, 2021, 01:50:31 PM »
Sending PM
Dalton Hammett  
Albion, Pa.
Bean Hill Flyers
AMA  29918

Offline Bruce C. Cunningham

  • Trade Count: (0)
  • New Pilot
  • *
  • Posts: 6
I need to clarify the description further.  The kit was produced by Hobby Fastners.  Believe they were the prelude to RSM Distribution.  I purchased this kit several years ago from a fellow modeler and have not opened it.  It appears NIB but might have been opened for inspection by the original owner.  Say that only because it looks to have been
resealed on the box flap.  99.9% sure the kit is complete and undisturbed.  Just pulled it down from my shop to
look at yesterday from an inquiry I had therefore the updates provided.
With that said,  I am changing the price to $95.00 which includes shipping in USA to the lower 48. 

Offline Randy.Birt

  • Trade Count: (0)
  • Ensign
  • **
  • Posts: 32
Re: Stuka Stunter - Don Still design - RSM kit
« Reply #3 on: June 21, 2021, 08:50:08 AM »
Bruce, I would like this kit please.

Thanks

Randy Birt

Offline Bruce C. Cunningham

  • Trade Count: (0)
  • New Pilot
  • *
  • Posts: 6
Re: Stuka Stunter - Don Still design - RSM kit
« Reply #4 on: June 22, 2021, 06:38:40 PM »
Should have posted this sooner but the kit has been sold.
Thank you for the interest.
Bruce

Offline Windwalker

  • Trade Count: (0)
  • Lieutenant
  • ***
  • Posts: 57
Re: Stuka Stunter - Don Still design - RSM kit
« Reply #5 on: June 22, 2021, 09:35:41 PM »
Bruce, I would like this kit please.

Thanks

Randy Birt

Please allow me to "hyjack" Bruce's post.. If this is not allowed, please delete my post with my sincere apologies.. Randy, Don Still and I were friends for many, many years.. He gave me several copies of his original Stuka Stunt plans, with instructions to distribute them to deserving modelers.. You can have one of those copies for just the cost of mailing/shipping.. If you're interested in these plans and want to scratch build Don's airplane, PM me direct...

Nick
Nick Gans aka
Windwalker

Offline Jim Rhoades

  • Trade Count: (0)
  • Lieutenant
  • ***
  • Posts: 109
Re: Stuka Stunter - Don Still design - RSM kit
« Reply #6 on: September 14, 2021, 10:58:09 AM »
Windwalker,

     I have sent you a PM regarding Don's plans for the Stuka.  I have long been an admirer of this model and hope to fly one in the near future.  I built the Ambroid kit back in "62 while serving in the air wing of US Navy in Iwakuni Japan.  It was almost ready for covering when I went back to the states for discharge.  My desire is to build the original version for OTS.  I would be very interested in acquiring a set of Don's original plans for the Fox 29 powered version.  Please check your messages and contact me regarding availability.  My contact info is on the PM.
Thanks,

Jim Rhoades

Offline FLOYD CARTER

  • 21 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 4291
    • owner
Re: Stuka Stunter - Don Still design - RSM kit
« Reply #7 on: September 14, 2021, 06:36:08 PM »
WINDWALKER  You should consider making copies of the original STUKA plans.  I think many modelers would like to build one.  Put them in the CLASSIFIED section of Stunt Hanger.
"Growing old is easy.
 Staying old is hard"
AMA #796  SAM #188  LSF #020

Offline 944_Jim

  • 21 supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 548
Re: Stuka Stunter - Don Still design - RSM kit
« Reply #8 on: September 14, 2021, 10:00:58 PM »
WW,
I have access to a large format scanner if you want to convert to PDF. This one is a bit large for me to build, but the little one for 1/2A tickles me.

I've done this for others on this forum.
Hit me up via PM if you want to talk it through.

Jim in NE MS


Advertise Here
Tags: stuka plans 
 


Advertise Here