Author Topic: Sterling Mustang and Yak 9 laser cut ribs (Read 9969 times)

Matt Neumann · « **on:** July 29, 2024, 08:23:21 AM »

I have laser cut ribs for the Sterling Mustang and Yak 9 planes. I believe these are cut the way the plane was originally done and not modernized. Plans can be downloaded off of the Internet. $15 for a set of ribs only. I can bring to the NATS. Otherwise shipping would probably be $5 to $10.

UPS 767 · « **Reply #1 on:** August 11, 2024, 05:37:08 AM »

Matt
Are you going to cut any twister ribs. I’d be interested in a couple of Francher sets.
Thanks
Mark

Matt Neumann · « **Reply #2 on:** August 11, 2024, 02:36:19 PM »

Quote from: UPS 767 on August 11, 2024, 05:37:08 AM

Matt
Are you going to cut any twister ribs. I’d be interested in a couple of Francher sets.
Thanks
Mark

These ribs were some I found in my dad's stuff. I have no idea where he got them. Or even how to cut some Twister ribs. Although that is an interesting idea.

Tony Drago · « **Reply #3 on:** August 14, 2024, 11:47:57 AM »

Any chance of showing some pictures of the ribs?

Matt Neumann · « **Reply #4 on:** August 15, 2024, 11:00:57 AM »

Quote from: Tony Drago on August 14, 2024, 11:47:57 AM

Any chance of showing some pictures of the ribs?

I am not sure how to compress the picture to fit. If I can send it to someone full size and then they compress it for me and post it that would work.

Dennis Adamisin · « **Reply #5 on:** August 22, 2024, 07:28:35 AM »

Quote from: Matt Neumann on August 15, 2024, 11:00:57 AM

I am not sure how to compress the picture to fit. If I can send it to someone full size and then they compress it for me and post it that would work.

...get a little help from your friends!

builditright · « **Reply #6 on:** May 20, 2025, 07:16:03 PM »

Hi Matt, I sold them to your dad many years ago. Shortly after I took over the G.S.M. kit line I had a fellow modeler with a laser draw them into cad and cut them. Then when I decided not to make those kits I sold your dad 50-55 sets. I thought that he had sold them on his site.

Matt Neumann · « **Reply #7 on:** May 21, 2025, 03:56:27 PM »

Quote from: builditright on May 20, 2025, 07:16:03 PM

Hi Matt, I sold them to your dad many years ago. Shortly after I took over the G.S.M. kit line I had a fellow modeler with a laser draw them into cad and cut them. Then when I decided not to make those kits I sold your dad 50-55 sets. I thought that he had sold them on his site.

He did sell them on his site. He just did not wind up selling them all. Now I have inherited them and would like to sell them. Thanks for the info. Nice to know where they came from.

dennyleo · « **Reply #8 on:** May 27, 2025, 12:27:21 AM »

Matt, if you will measure the height of the ribs at the leading edge, I can probably tell you which plan might be appropriate. You might have better luck offering the sets with a construction plan, but then again, I'm often wrong.

Dennis

Author Topic: Sterling Mustang and Yak 9 laser cut ribs (Read 9969 times)

Matt Neumann

Sterling Mustang and Yak 9 laser cut ribs

UPS 767

Re: Sterling Mustang and Yak 9 laser cut ribs

Matt Neumann

Re: Sterling Mustang and Yak 9 laser cut ribs

Tony Drago

Re: Sterling Mustang and Yak 9 laser cut ribs

Matt Neumann

Re: Sterling Mustang and Yak 9 laser cut ribs

Dennis Adamisin

Re: Sterling Mustang and Yak 9 laser cut ribs

builditright

Re: Sterling Mustang and Yak 9 laser cut ribs

Matt Neumann

Re: Sterling Mustang and Yak 9 laser cut ribs

dennyleo

Re: Sterling Mustang and Yak 9 laser cut ribs