stunthanger.com
General control line discussion => Classifieds => Topic started by: Bill Morell on December 19, 2022, 09:32:53 AM
-
Looking for a set or 2 and no, Shttrman doesn't have them.
-
Check with Jim Lee about the MAX-S screws. I think he found a source and has those, may have at least a back plate gasket. I don't think I have ever messed with a head gasket on one to really know what they are, but I imagine they are aluminum? he may have those also. There is some one else on eBay that has back plate gaskets.
Type at you later,
Dan McEntee
-
Some of the OS head gaskets are in a rabate up in the head , line top flange diameter .
Can be a bit trickey to get out reuseable - But hard to see if there IS one . A scalple tip can lift the edge
or with patiance , work the thing free .
-
I checked with Jim Lee and he has a junk engine he is sending me. I ended up making the gaskets I needed. Sometimes I just like OEM stuff so if anyone has a set let me know.