stunthanger.com
General control line discussion => Classifieds => Topic started by: Onelife on August 26, 2023, 02:51:42 PM
-
Looking to buy Blue magic Hemihead for Fox 35
-
Looking to buy Blue magic Hemihead for Fox 35
What is your budget?
-
I have one. Not sure if it is blue. If interested will dig it out.
-
The Magic Blue Heads were made by Tom Muggleston who no longer makes them. They are peculiar by the fact that the Glow Plug hole is slanted to the rear of the engine aswellas being anodized Blue. The rest of the modifications to make the Fox .35 run GREAT are: ST NVA, Stuffer Back Plate, and do not shrink down the venturi oriface! The ST NVA will run just fine if left alone! Shorten the Needle by heating it cherry Red, letting it cool, ane then bend it over so as to nor break off if ship is landed upside down. Cut off excess, these mods for profile mounts, file of sharp edges!
Good Luck!
Phil Spillman
-
The Magic Blue Heads were made by Tom Muggleston who no longer makes them. They are peculiar by the fact that the Glow Plug hole is slanted to the rear of the engine aswellas being anodized Blue. The rest of the modifications to make the Fox .35 run GREAT are: ST NVA, Stuffer Back Plate, and do not shrink down the venturi oriface! The ST NVA will run just fine if left alone! Shorten the Needle by heating it cherry Red, letting it cool, ane then bend it over so as to nor break off if ship is landed upside down. Cut off excess, these mods for profile mounts, file of sharp edges!
Good Luck!
Phil Spillman
Phil, where can you get a stuffer back plate?
Roy Johnson
-
Phil, where can you get a stuffer back plate?
Roy Johnson
Nowhere where you can just plug in your credit card and buy one.
eBay sometimes but $$$.
Occasionally one can be spotted buried in a parts lot.
Greg at Kamtechnik told me (July 2023) he was going to build a handful and see if they sold well, but I haven’t seen them posted yet. Maybe if you let him know you were interested it would help the schedule.
PW
-
Hi Roy, I'd try the Bay or on RCgroups.com and inquire! I'll check my stash to see if I might have one sticking around!
Phi Spillman
-
I'm making a production run of these in coming months - a clone of the blue magic head. Along with stuffer backplates and ABC piston/liner/rod/pin sets.
-
I'd be interested in some of those parts.
-
ID LIKE THE ABC PISTON AND CYLINDER
-
Asking for a friend....
How does one get on the wait list for items?
-
Asking for a friend....
How does one get on the wait list for items?
Send Brian a message directly and specify what you want. Brian adds you to the list, then notifies you later in the process what the price will be and when they are expected to be ready. It has worked very smoothly for me 3 times. Brian is an excellent vendor. He’s just very far away and shipping cost is out of his control.
-
Hi Doug, you are already on the list for 2 ABC sets mate.
ID LIKE THE ABC PISTON AND CYLINDER
-
I'd take 2 of the heads plus 6 of the stuffer backplates.
-
I'd take 2 of the heads plus 6 of the stuffer backplates.
Send him a PM also or a direct email so he has good record of your order. If something happens to this web site, you're screwed!
Type at you later,
Dan McEntee
-
Very true - it makes it much easier for me to notify people if I have an email address
Send him a PM also or a direct email so he has good record of your order. If something happens to this web site, you're screwed!
Type at you later,
Dan McEntee
-
Brian,
Asking for a friend. What is the estimated cost for the Fox 35 piston/liner/rod set?
-
Approximately $115 Australian dollars
Brian,
Asking for a friend. What is the estimated cost for the Fox 35 piston/liner/rod set?
-
Thanks
Approximately $115 Australian dollars
-
Hello Brian, please check your mail. Thanks!
-
I'm making a production run of these in coming months - a clone of the blue magic head. Along with stuffer backplates and ABC piston/liner/rod/pin sets.
Approximately $115 Australian dollars
Brian if the Piston/Liner/Rod/Pin is $115AUS +/-, then how much is the whole enchilada including the clone of the blue magic head, along with stuffer backplate and ABC piston/liner/rod/pin sets?
-
I don't know yet. Is the short answer.
Heads will be approximately $32AUD. No idea on price of backplates yet.
Brian
Brian if the Piston/Liner/Rod/Pin is $115AUS +/-, then how much is the whole enchilada including the clone of the blue magic head, along with stuffer backplate and ABC piston/liner/rod/pin sets?
-
I see Stan Frady is offering Fox 35 stuffer backplates for $30USD shipped. He's on FB Control Line Classifieds.
Ordered one on Monday, he shipped it on Tuesday!
Seems he offers a bunch of mufflers too!
-
Thanks everyone I didn’t know there were any reply’s I thought I get a emalike I do for PM,s I’m sorry.
Got what I needed But Brian I’m still interested in two sets of you Liners please. Thanks again
-
Stan Frady also makes the back plates. You can find him on facebook.
-
The Muggleton 'Blue Magic' heads are now available from Lee Machine Shop. Sold as the 'Silver Bullet' Comes with the head shim and socket head screws.
See the Vendors corner...
thanks
Jim