stunthanger.com
General control line discussion => Classifieds => Topic started by: Doug Moisuk on May 24, 2023, 12:13:11 PM
-
There is a fellow who has gaskets for virtual every engine. The link I had doesn’t seem to work anymore. Can someone give me the link please.
-
Doug, if this was the link http://www.icbimproducts.com/ He is no longer producing gaskets and would like to sell the business. I contacted him about 3 months ago and that's what he told me.
-
Not working??
-
Doug, if this was the link http://www.icbimproducts.com/ He is no longer producing gaskets and would like to sell the business. I contacted him about 3 months ago and that's what he told me.
Is this the same person who's been selling a large variety of gaskets on ebay
-
Tony, yes this is the same guy on EBAY. I just copy and pasted his username from EBAY which was icbimproducts. This matches my non functioning link above. One could contact him through EBAY but as I mentioned, he told me he was selling the business and isn't producing gaskets.
-
Tony, yes this is the same guy on EBAY. I just copy and pasted his username from EBAY which was icbimproducts. This matches my non functioning link above. One could contact him through EBAY but as I mentioned, he told me he was selling the business and isn't producing gaskets.
I have bought from him before. Sorry to see him go. Hope someone takes It over.
-
By all means try Jim Lee he's got many gaskets for many engines and my guess he'll have the ones you need! He is a sponsor of this Forum and is listed in the vendors corner!
Phil Spillman
-
Haven't looked lately but I think Jim might have the gasket making tool. Of cousre I make mine out of diet pepsi cans using an old compass from school days and a sharp Ex-acto blade. On the old McCoys I don't use the thick gasket material. D>K