stunthanger.com

General control line discussion => Classifieds => Topic started by: Bootlegger on March 23, 2021, 08:19:48 AM

Title: Fox 19 & 25
Post by: Bootlegger on March 23, 2021, 08:19:48 AM

  Need to find a needle and spray bar that I can replace the stock needle and spray bar in these engines with a needle assy with a single hole spray bar ...   Obliged    D>K    H^^

Title: Re: Fox 19 & 25
Post by: Dennis Toth on March 24, 2021, 04:33:19 PM

Contact Randy Smith - his PA NVA for Fox should work really good.

Best,   DennisT

Title: Re: Fox 19 & 25
Post by: Bootlegger on March 25, 2021, 10:37:50 AM

 Thanks Dennis, talked to R Smith and was told he has nuttin to fit, so I checked the dia and it is .093, will continue to search.. y1

Title: Re: Fox 19 & 25
Post by: john e. holliday on March 25, 2021, 11:05:17 AM

Did you try MECOA?  I just ordered some venturis for the FOX .15 and they are on the way.  By The way the NV assemblies I got from Randy Smith were a little tight so I reamed out the hole for the spray bar.  Engines start and run great.  Did have to ream some washers ti center the spray bar hole. D>K