For what it’s worth, I recently inherited a rather large assortment of engines and engine parts, both new and used.
LOTS of other assorted items.
I have no use for them and all monies collected will go to the Border Collie rescue center.
Prices will range from FREE to very reasonable.
Buyers pay shipping costs.
I will be going through them soon.
I will also be listing kit(s), handles, props, electric stuff, MANY PLANS, etc.
Some of the plans: Thunderbird, Nobler, Vector, Chief (both versions), some Randy Smith designs, Twister, Atom, Airon, and many more. Some free and others very reasonably priced.
I will post a complete list as soon as I inventory them.
Plans will be shipped rolled (EXPENSIVE!) or folded (much cheaper).
Contact me with your needs.

Some Items for sale now:
Two NEW hard point handles, one new in pack, never assembled, one assembled but never used. $15.00 each. SOLD
Four LARGE EZ Just handles, new and used. $5.00 each or all four for $15.00. SOLD
Shark 15 kit by Walter Umland, box has been opened but nothing ever removed. $25.00 SOLD

Plans for stock Twister, $6.00                       "      "     "       "      "     
Plans for SV 11 $6.00                                  "      "     "       "      "

Plans for Vector $6.00                                  "      "     "       "      "
Plans for Dumas Chief $6.00                         "      "     "       "      "

Mufflers for OS FP and LA engines, mostly new. - Contact me for needs and prices.
Mufflers for Super Tiger engines, mostly new. - Contact me for needs and prices.
Brand new OPS 60 RC, new in box. With a HEMI head and C/L venturi, this is an excellent and very powerful stunt engine. Offers invited.


This is just a very small portion of what I have to offer.
As soon as I return home (July 7), I will start to list many more items.

Bob Z.

I'll take the two hard point handles.

I will take the Twister plans and the Fancherized twister plans folded let me know where to send funds

Thaks Bill

Vector plans, is this for the 40 size vector or the larger original Vector?

PM sent

More plans:
Skywriter (2 sets) by Xiang Dong Zhang
Humbug 91 by Bob Baron
    "        71  "     "     "
Vagas by Steve Buso
Shark 45 by Lew McFarland
Ringmaster  S1, needs foam wing $3.00
SV-11 by Randy Smith (2 sets)

All plans $6.00 unless otherwise noted. (+shipping)

Keep watching - many more to come!

Hi Bob;
 PM sent.

 Blessings;
   Larry Fruits

MORE PLANS

Barecat by Bill Netzeband and Bob Baron
Cobra by Steve Wooley
Argus by Steve Wooley
Time Machine II R/E
Time Machine 60
Time Machine 40
Fancher modified Twister
Crusader by Charles Mackey
Take-Apart Magician for electric or glow

All plans $6.00 + shipping

Still more to come!

Any word yet on which vector plans you have? The 40 size or the bigger original with low 600 " wing area.

More Stuff!!!!

3 crankcases for LA 40, $5.00 each or $10.00 for all three.
3 crankshafts for LA 40/46, $5.00 each or all three for $10.
NEW piston, wrist pin, liner and head for LA 40. $10.00.
Plastic backplate for LA 40/46. FREE.
Head for LA 46, $4.00.
IF YOU COLLECT OS LA PARTS, MAKE ME A OFFER FOR THE WHOLE LOT OF LA STUFF!
Crankcase for ST 46, broken venturi, nicely repaired. FREE.
Crankcase for ST 51 (later version), FREE.
Fox 15, slant plug version, excellent condition, $15.00
NEW in box muffler for ST 46, $10.00.
Plans for Polliwog Chief, $6.00.
Plans for green-box Nobler including third sheet for full-size ribs and formers, $6.00.
Plans for Thunderbird, upright engine version, $6.00.
Plans for Stuntin" Ringmaster - 35 Pro wing with all details. From kit #6750. $3.00.

Buyer pays shipping for ALL items.

Bob Z.

A few more plans:
Cardinal by Dixon - uses foam wing. $3.00
Praxis     "     "                                $6.00
Zlin        "     "                                $6.00
Sheet 2 of Legacy plans --------------FREE

Please note: I still have quite a few plans left as seen in my earlier posts.
                   I have no use for them and I'd really like to see them get into good hands.
                   If they are not sold by the time the ad expires, they will go in the trash.

Bob Z.

Bob i would like to get two copies of the SV-11 plans ..Please send me a pm for total amount so I can send you a check.

Some stuff that I put on eBay.

McCoy 29 rear intake speed engine - check it out, it's only bid to $1.00!
Paasche airbrush
BRAND NEW Dyna Jet
Fox 36X - very good condition, runs perfectly, excellent compression. In original box with instructions.
Box of six Johnson Core Cable lines - .015 x 70 ft.

My seller nickname is clnut.

Dyna jet price?

Hi, Harold - it's on eBay.
You must bid on it.
They usually go pretty cheap.
Bob Z.

Bob -

         What are you asking for the Fox 36X ?

Regards,

Harold

They're just lines made by Johnson (also made engines).
Very smooth and flexible, very popular in the 60s.
Bob Z

Coming soon:
Oriental, built and ready for power.
A few more engines - Fox 36, Super Tiger 60s, OS Max 35 S, some Diesels, electric motors, etc.
I hope to have the stuff posted by the end of the day.

Bob Z.

                                  ALL SOLD

Two Brodak ARC kits

Brodak P-40.
Brodak SV-11.

Both kits are in original boxes and appear to be untouched.
Prices to follow.

Here's the Oriental.
It needs an RC type mount.
If you buy it and tell me what engine you will use, I will supply the mount.
Now we all know it's expensive to ship but if anyone wants it, I'll deliver it within 50 miles from my house (1036 Jonte Drive, Manning, SC 29102) and the buyer can meet me with CASH.

Sent you PM