stunthanger.com
General control line discussion => Classifieds => Topic started by: Crist Rigotti on September 11, 2022, 06:24:01 PM
-
3 used Fox engines. A .15, a 40th anniversary .35, and a .36. What you see is what you get. $40 shipped to the lower 48.
-
What you're calling a 40 probably isn't. I only remember that engine being available as a .29 or a .36. I had one of the .36's long ago. It was noticeably more powerful than the .35 stunt.
BB
-
What you're calling a 40 probably isn't. I only remember that engine being available as a .29 or a .36. I had one of the .36's long ago. It was noticeably more powerful than the .35 stunt.
BB
Yeah, I think it's a slant plug .29 or .36 also. Only way I could tell is to take the head off and measure the bore. Sceptre Flite web site has the specs for those engines. The .40 Stunt has a muich different case, especially on the bypass side.
Type at you later,
Dan McEntee
-
Well........
The way I determine if the motor in question is a 29 or 36 is to look on the top of the mounting lug.
The 29 is stamped '29', the 36 has no stamping.
Good luck & "Tight Lines!" H^^
Wes
-
OK guys. We'll call it a .36 then.
-
I'll take em......
-
Well........
The way I determine if the motor in question is a 29 or 36 is to look on the top of the mounting lug.
The 29 is stamped '29', the 36 has no stamping.
Good luck & "Tight Lines!" H^^
Wes
That's too easy! You don't need tools or anything to do that!! LL~ LL~ I had forgotten about that detail. I'm pretty sure I have examples of each.
Type at you later,
Dan McEntee
-
I'll take em......
They're yours.
-
Does that mean they were already his, or just that they are his now? n~
-
Does that mean they were already his, or just that they are his now? n~
The later!