News:

 

CLICK HERE--><--CLICK HERE

My new classic plane, Hi Johnson Stuka

Started by Dane Martin, July 30, 2018, 09:25:24 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Dane Martin

Started my classic legal plane. This is the one I won at VSC in the raffle. Got the wing started tonight. Lots of doublers and stuff going in.

Looks like the wing is quick. My question is, will the wing mounted gear hold up to grass landings?

Dane Martin

Assembly of the giant building surface. This is a 59" wing.

Dane Martin


Dane Martin

Ribs all set in for dry fit. I think the "gull" wing is really neat!

wwwarbird


A design I've always really liked too, staying tuned!  ;D
Narrowly averting disaster since 1964! 

Wayne Willey
Albert Lea, MN U.S.A. IC C/L Aircraft Modeler, Ex AMA member

Dane Martin

Thanks guys! No progress last night. It was bowling league night for my wife. She won the side pot for highest scratch game of the first round. Tonight my goal is mostly to adjust all the ribs so they are fully floating. There are some that are a little too tight on the spar. They're not on their respective little jig blocks at rest.

Skip Chernoff

Keep up the good work,can't wait to see it shaping up.

Dane Martin

Nothing worthy of pics last night. The W4 ribs have a ply doubler on each side of their nose. My alignment of laminating the doublers on one wasn't exactly perfect so it wouldn't sit at 90 degrees to the spar. So a little sanding in the spar slot cleared that up.
The rest was just a few ribs that were too tight on the spar slot. So I sanded a little so they floated on the spar and sit on their little jig blocks. I'm going to try really hard to make this plane nice.

Dane Martin

Oh and here's the paint scheme I'll be using. I ordered graphics from Callie's graphics. It was neat because she has planes pre-loaded in her system. You just pick the plane and then pick the scale. This one worked out to 1/11

EddyR

Nice job so far on a rather difficult wing.
Does any one have a picture of jack sheets IBeam Stuka.
Ed
Locust NC 40 miles from the Huntersville field

Dane Martin

#10
[/s]
Quote from: EddyR on August 03, 2018, 03:22:57 PM
Nice job so far on a rather difficult wing.
Does any one have a picture of jack sheets IBeam Stuka.
Ed

I'm not sure Eddy. I have this old pic of Charlie Reeves with a big Straight wing Stuka Shark 45. Wonderful pic even if it's not the I beamer.





Edited to correct plane. I still love the paint scheme

Dane Martin

Well after 11-12 hours working outside, it's pretty nice to work on this wing in the AC! Then after all the rib adjustments, I feel like I worked another day!
BC mount started and all the ribs adjusted to sit level on the building board.

Dane Martin

Dry fit of the upper spar. A little more rib adjusting needed. The 3 clamps are my markers. Those three raised up a couple thousandths. I really want to make this as straight as I can.

Dane Martin

I now see why people told me this could be a difficult wing to build. Lots of rib adjustments! The upper 1/4x1/4 spar goes in, with 8 miter cuts. Full length at the W4 out, and two sections each side mitre cut to go up and over the center. Lots of precision sanding to get "seemless" joints.

Dane Martin

Now a big ply spar doubler goes into that center section, to W4 on each side.

George Waters

I have a Sheeks stuka that I built a few years ago. I know it was posted on here at brodaks alongside the bmjr prototype I believe. I can't post a picture as my computer savvy is nil.I made the wing equal panels so it also 59 inches in span. I am also building the Hi Johnson version from plans I got off ebay. I did buy the rib set from bmjr models. I have a lot of parts made but not assembled yet as other projects are ahead of it. I will be watching your progress to learn what issues may crop up.Your work looks very nice.  George

George Waters

If you go to page5 in the classic section under the title ibeamers about halfway down the page is a picture of my sheeks stuka,the 1963 edition.
george

Dane Martin

Good lord! If that's a 20pt finish, I'll hope for a 10!

Dane Martin

This TE is kinda kicking my butt. I tried to add the TE as one piece. I ended up cutting that splice, added it back in and rejoined it. Now, I had to spritz the TE with a little isopropyl alcohol and weight it down to let it relax. It was probably close enough, but I'm trying to exceed my previous building projects.

Dane Martin

The TE sheeting goes up and over the center hump also! I'm hoping this turns out to be a good way to attach the TE here.

Dane Martin

Definitely some character to this TE. I got the inboard side complete tonight. It's becoming an exercise in patience!

Dane Martin

The glue is dry and the clamps are off. And, it's still resting on the little jig tabs! So far it's still relatively straight!

Dennis Adamisin

GREAT job Dane!  I like how meticulous you have been on getting the alignment of the ribs on the spar, looks like it paid off nicely.  Way back in the early 1960's, the guy who was helping my dad get started in stunt built one from the magazine plans.  His finished at 60 ounces with a Fox 35.  It looked badass but it just flew.... bad!  I am sure you will not have THAT problem!


Gonna keep tuning in on this thread - good luck and keep up the good work.
Denny Adamisin
Fort Wayne, IN

As I've grown older, I've learned that pleasing everyone is impossible, but pissing everyone off is a piece of cake!

Robert Zambelli


Dane Martin

Quote from: Robert Zambelli on August 07, 2018, 04:27:59 PM
What will you power it with?

Bob Z.

This one will be electrified!


Dennis, because this will be my first big electric model, I have no idea what the weight will or can be. Based on how I usually build, and this size of model I would hope for 45oz?
I am REALLY excited about this one though!


Advertise Here