stunthanger.com
Classic Designs => Classic Planes => Topic started by: Ty Marcucci on February 05, 2023, 03:54:25 PM
-
After diddiling around for years,I finally got my Juno kit off the pile and started. First of course is the fuselage. At first weighing it was 14.8 OZ. Now after a lot of plane work with a razor plane, rough and fine sanding, it is at 9.8 OZ. This is less the cowl. I have the rudder roughed out and the stab/elevators sanded pretty much to shape. A very slow, for me, project. Too cold to work comfortably in the garage. D>K
-
Some photos ,cowl in the rough.
-
More. Fuselage at 9,8 no hollow blocks yet.
-
Stab
-
stab before gutting centers and adding ribs
-
Fin & rudder unfinishd
-
great work Ty! one of my fave i-beams!
i have one kit here for the upcoming future....
a LOT of sanding needed isnīt it?
regards