stunthanger.com
Classic Designs => Classic Planes => Topic started by: Roger_Pion on September 21, 2020, 05:58:27 AM
-
Hi, I came across a partial green box Nobler kit and I'd like to complete it. Does anyone have an inventory of the pieces that come in the box?
Also, the pieces punched out of this plywood sheet are missing. Does anyone have a pic of this sheet with those pieces so I can cut some?
Thanks for your help.
-
If memory serves me that missing part is the bellcrank floor. I think it is outlined on the wing plan. I had a set of green box plans (I think that is required reading LL~) but lost them in the fire.
I am pretty sure they are out there on the internet.
Ken
-
The Top Flite kit plan is on Outerzone.
-
I think Tom Dixon or some one else put out a parts outline plan for the Green Box kit. Might do a search on here for that information or call Tom Dixon. I think his phone info is in the vendors section, and he does not do the internet, but he does have a web site. Might have been Pat King also, or Pat Johnson.
Type at you later,
Dan McEntee
-
If memory serves me that missing part is the bellcrank floor. I think it is outlined on the wing plan. I had a set of green box plans (I think that is required reading LL~) but lost them in the fire.
I am pretty sure they are out there on the internet.
Ken
Thanks Ken, that makes sense. I can cut a bellcrank floor while I build the kit.
-
Thanks for the replies guys. The plans are here and I have lots of extra punched piece sheets from another source. Was just looking for an inventory to help identify missing planks, sticks and blocks. S'ok, the build will reveal them.