News:

 

CLICK HERE--><--CLICK HERE

Brodak Tomahawk

Started by Fred DiMaria, March 18, 2024, 07:37:05 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Fred DiMaria

Finally finished this model - happy to get it off my board.  I am hoping to fly it this summer. It weighs 28.5 oz with the heavy wheels and spinner. Does anyone have any experience with this model, I built it from a Brodak kit. I used a lot of tips I learned from Sparky online.

Ty Marcucci

Personally I'd remove most, if not all, of that right rudder.. It will cause yaw, which will slow the model down, not in a good way..  H^^
Ty Marcucci

Ty Marcucci

Nice looking model Fred.. What engine is that?  OS or Brodak?
Ty Marcucci

Fred DiMaria

It's an OS .25 FP - on the Rudder offset, I will give it a few test flights, but I agree, I may have to reduce the offset (and unfortunately cut into the finish - ughhh)

john e. holliday

As I have had both versions of the Tomahawk, don't sweat the rudder off set.  It will do the pattern.  May not win NATS  but is a good plane.  In fact I have both kits of the Tomahawk that I was going to build and power with OS LA 25's.  But things happen. D>K
John E. "DOC" Holliday
10421 West 56th Terrace
Shawnee, KANSAS  66203
AMA 23530  Have fun as I have and I am still breaking a record.

wwwarbird


Looks great Fred, just like on the Brodak box! Should be a great combo with the FP-25, have fun!  y1
Narrowly averting disaster since 1964! 

Wayne Willey
Albert Lea, MN U.S.A. IC C/L Aircraft Modeler, Ex AMA member

Gerald Arana

`Fred;

I built one back in the late '50's or early 60's (?)

Unfortunately, I can't remember squat about it........................(I'm 84)

I also built a "Hot Rock" and it was just that! Had a Torpedo 29 twin stack on it.

Good luck, Jerry



Advertise Here