stunthanger.com
Speed,Combat,Scale,Racing => Carrier => Topic started by: Mike Callas on October 07, 2010, 10:44:16 PM
-
I'm going to convert my super clown ARF to a 15 carrier plane. I have a OS 15 CVA enroute.
Without flaps the wing is 270 Sq in. Is that too much wing to start off with?
I'm removing the bellcrank from inside the wing.
I'm a little confused as to which bellcrank to buy from Brodak. Can you guys suggest which model is correct for a 15 size plane?
Is there another option for the bellcrank assy?
Are there any kits for 15 carrier?
Thanks
Mike
-
If you want the "Brodak" points, you have the Flying Clown (not super), Circus Prince, and Junior Lightning Streak.
Anything is possible, but a Super Clown is least on the edge of being too big for a 15. The plane was designed for a 29-35. With modern engines, a 25 is plenty. But a 15 is long stretch.
Since you can't use a slider in 15, indoor controls are OK.
-
Mike,
Paul's comments are right on, the flying clown has a about 200 sq inches and it is a great 15 carrier plane. Most of the models I have made over the years are 180-220 sq in. Less than 180 is too little unless you build very light. I do have a TBF @ 150 sq in, but it is electric, all foam and only weighs 15oz all up flying weight. Hangs great though!
john
-
Super clown cut down to 235 sq".
OS 15 CVA
1st flight today
Setting up the leadouts and lines was a real head scratcher. Got it very close on 1st try.
Its not that fast, but it is a plane to get my feet wet.