stunthanger.com

Building Tips and technical articles. => Building techniques => Topic started by: Walter Johnson on February 22, 2007, 08:57:26 AM

Title: Wing Install Tempest II
Post by: Walter Johnson on February 22, 2007, 08:57:26 AM

     I'm about 2/3 finished with the wing and would like some methods for the wing install I have not started the fuselage yet. I hate the idea of cutting the fuse sides after all that nice carbon fiber lamination is done. All ideas will be well apreaciated. Thanks Walt #^

Title: Re: Wing Install Tempest II
Post by: Bill Little on February 22, 2007, 10:04:21 AM

Hi Walter,

I have seen several times where people cut slots for the flap horn to go through the fuselage without having to cut out the saddle.  I have only done that with profiles, but I think Torn Morris does it that way with his built ups.  Sounds like a good idea since the flap fairings tend to cover over the slot.

Bill <><