stunthanger.com

Building Tips and technical articles. => Building techniques => Topic started by: sadams714441 on January 30, 2007, 06:46:17 AM

Title: Vector 40
Post by: sadams714441 on January 30, 2007, 06:46:17 AM

need some help mounting the bellcrank in a Vector 40 kit.  The bellcrank that came with the Brodak kit is that a good bellcrank to use?  Also it tells you to put #10 washers top and bottom with soilder, is that the best way or is there some other way ?  Z bend the rods and such to connect the flap horn and the rod to the bellcrank... Is there a better way?

Steve

Title: Re: Vector 40
Post by: Leester on January 30, 2007, 12:32:08 PM

Steve: The method that comes with a Tom Morris set up is probobly the best, wheel collars and fuel tube.

Title: Re: Vector 40
Post by: sadams714441 on January 30, 2007, 12:41:08 PM

Thanks
I'll give that a try, so no soilder at all then?

Title: Re: Vector 40
Post by: Leester on January 30, 2007, 01:35:22 PM

Not in this application. When you have it all set up put thread locker on the wheel collar set screw.

Title: Re: Vector 40
Post by: Leester on January 30, 2007, 01:43:50 PM

As far as Z bending the pushrod, With this plane I think going with C/F pushrods and ball links is well worth it. Go with the best you won't regret it.