stunthanger.com
Building Tips and technical articles. => Building techniques => Topic started by: Richard Koehler on September 24, 2011, 06:37:59 PM
-
Two years ago when I built my WINGMASTER I decided to try Ultracoat Hinges. The hinges were tight when I put them on. Last week when I got that airplane out the elevator was very loose. Do those hinges stretch over time. Is it possible to shrink them tight again or should I just get rid of them and put in std pinned hinges?
-
If you're running glow power, the exhaust residue will eventually loosen them.
-
Just hit them with the iron again. If the glue joint has given up, you may need to replace them. H^^