stunthanger.com
Building Tips and technical articles. => Building techniques => Topic started by: alan roadknight on November 01, 2015, 03:05:37 PM
-
Hello everyone,
I have a ARC IMPACT that has sat in its box for some time and I would like to convert it to electric. Has anyone out there done this with this model? At first glance the lower plastic cowl may cause a few problems although there is enough room for the battery etc.
If anyone has done this conversion I would appreciate their input
Cheers
Alan
-
Hi Alan,
I am sure there will be replies to this conversion for you. Since you already have concerns about the plastic cowl, I would go ahead and make a balsa copy of it. That could be your first step in your conversion.
Good Luck!
Bill
-
Hi Bill,
Thanks for your reply. I recon you are right with the cowl, I have posted this in the electric section to possibly get more response
Kind Regards
Alan