stunthanger.com

Building Tips and technical articles. => Building techniques => Topic started by: ken Kubushefski on November 16, 2007, 04:57:38 PM

Title: ukey 35
Post by: ken Kubushefski on November 16, 2007, 04:57:38 PM

Just beginning again after 35 years. All indications are a ukey is the way to go. Where can we purchase one ? have some old fox 35's. Looking forward to any help. Live in NE PA.
thanks so much Ken H^^

Title: Re: ukey 35
Post by: Ralph Wenzel (d) on November 16, 2007, 09:50:16 PM

Jim Pearson's email address is:

ModelWings@aol.com

Great choice for a trainer or re-trainer. An OS 20FP or 25FP is a good engine for this, as is the venerable Fox .35. The Tulsa Glue Dobbers had an excellent 4 - 5 page article on making the U-Key even better, but it's no longer on their website. Perhaps you can contact some of the members via their website to get a copy of this article.   http://www.tulsagluedobbers.com/

Enjoy,

Title: Re: ukey 35
Post by: Leester on November 17, 2007, 04:46:45 PM

Tom Dugan did a review on these, check the review section I think the secound page.

Title: Re: ukey 35
Post by: ken Kubushefski on November 22, 2007, 06:22:21 AM

Ralph,

     Also all who responded, thank you. I've emailed Jim but have not had a reply. I guess he's extremely busy. What is the usual reply time? I'm sorry but really excited about returning to the sport   thanks again ken

Title: Re: ukey 35
Post by: Leester on November 22, 2007, 07:47:02 AM

I've heard sometimes he's alittle slow on replys, but hang in there you'll get a hold of him.