stunthanger.com

Building Tips and technical articles. => Building techniques => Topic started by: Igor Burger on February 20, 2007, 05:02:46 AM

Title: this could help
Post by: Igor Burger on February 20, 2007, 05:02:46 AM

http://www.rcmodely.sk/F2B/

Title: Re: this could help
Post by: frank carlisle on February 20, 2007, 06:10:10 AM

excellent sequence and very nice workmanship Igor. Thankyou.

I would be interested in seeing how you hold down the tail end of the fuel tank in the plane. And how you go about connecting the pushrod during assembly.

Title: Re: this could help
Post by: Igor Burger on February 20, 2007, 06:16:42 AM

The tank is on short screw on both sides, just taht rear ha two holes for tanks of different volume:

(http://www.rcmodely.sk/F2B/DSC01163.jpg)

Title: Re: this could help
Post by: Igor Burger on February 20, 2007, 06:22:51 AM

Assembing is simple, first I attach pushrod to tail. then I mount tail and pushrod is in hole for wing. That gives enough space (approximately 1 inch between top of wing wing and bottom of fuselage) for inserting to the flap horn and fixing ... then I mount wing to the fuselage

if you can imagine wing attached to that bottom dismountable part (picture below), you will know what I mean

(http://www.rcmodely.sk/F2B/DSC01504.jpg)