stunthanger.com
Building Tips and technical articles. => Building techniques => Topic started by: steve pagano on March 25, 2008, 09:28:19 AM
-
Hello All,
On my new SV i am pretty much ready to join the wing but was wondering if the leading edge is to pointed and needs to be rounded more or if its good the way it is?
T.I.A
-Steve
-
Why don't you just put it up against the plans and see if the LE radius match? If not sand till they do.
-
Why don't you just put it up against the plans and see if the LE radius match? If not sand till they do.
Hi Crist,
I am actually building without plans! i just keep looking at other sv's lol but i do have a set on the way.
-
Crist,
mmmm, that "Jumbo Jack Hamburger" sounds good.
-
Hello All,
On my new SV i am pretty much ready to join the wing but was wondering if the leading edge is to pointed and needs to be rounded more or if its good the way it is?
T.I.A
-Steve
HI Steve
The LE looks a little sharp, this is the correct radius shown below, by the way you really should have plans to build a plane, this is shown on the plans
Regards
Randy
-
Yep, what Randy said.