stunthanger.com
Building Tips and technical articles. => Building techniques => Topic started by: Rob Killick on November 06, 2007, 05:43:18 PM
-
Hi ,
Just a short question , this time ...
Do I still run a thin line of clear dope on the edge of the masking tape to stop the second colour from bleeding under ?
Thanks
-
I would. H^^
-
Rob,
I usually apply 3 or 4 coats of fairly thin clear to the edge of the tape-- I use a small brush, maybe 1/8 inch or so.
I have been doing a black and white checkerboard on my Legacy wing and use three or four coats to be sure that the tape intersections are sealed.
Jim
-
Thank you gentlemen :)
-
I use good tape & no clear.