Author Topic: Original Sterling Mustang CG? (Read 1563 times)

Terry Caron · « **on:** October 15, 2015, 07:49:59 PM »

Anyone have a measurement from the LE for the correct CG for the Mustang?

Thanks.

Terry

Terry Caron · « **Reply #1 on:** October 18, 2015, 07:33:05 PM »

OK then - how about for the Brodak Mustang?

Terry

jim gilmore · « **Reply #2 on:** October 18, 2015, 07:59:21 PM »

In the absence of an actual location . I would start at about 3/4 of an inch behind the leading edge and add tail weight till it just gets a bit over reactive...going very slow with the adding. Somewhat nose heavy is a lot safer than a small amount tail heavy.

Terry Caron · « **Reply #3 on:** October 18, 2015, 08:03:27 PM »

Thanks Jim - sounds like a safe way to start.

Terry

GregArdill · « **Reply #4 on:** October 19, 2015, 09:53:34 AM »

Terry,

I guess you're asking about the 38'' span version.

Hip Pocket forum has a CAD redraw of this version on its plan gallery. Shows the CG range.

Terry Caron · « **Reply #5 on:** October 19, 2015, 11:02:52 AM »

Thanks Greg - appears to be ~1.5" to 2" from the LE.

Terry

Author Topic: Original Sterling Mustang CG? (Read 1563 times)

Terry Caron

Original Sterling Mustang CG?

Terry Caron

Re: Original Sterling Mustang CG?

jim gilmore

Re: Original Sterling Mustang CG?

Terry Caron

Re: Original Sterling Mustang CG?

GregArdill

Re: Original Sterling Mustang CG?

Terry Caron

Re: Original Sterling Mustang CG?