stunthanger.com
Building Tips and technical articles. => Building techniques => Topic started by: Jim Treace on March 20, 2007, 02:12:09 PM
-
Guess I thought the wax would bring out the shine on my Smoothie more than it did. Now I want to remove the wax and put on a few more coats of clear dope. What is the best way to remove wax without affecting the finish?
Jim
-
Can't be much different that doing art work on motorcycle tanks and fenders. I use prep-sol and clean rags. Next I use more prep-sol and more clean rags. Z@@ZZZ Then soapy water and a sponge, rinse a couple of times, and the wipe down with alcohol.
Lee TGD
-
I second that, prepsol, a couple times, then soap and water,, Just clean it till you get that "feeling" that its good, then clean it again!
-
OK,OK, got it!
Thanks very much
-
I have asked profesional auto painters what they like best so they don't have a problem and almost everyone says Tide laundry detergent does the job best for them. Wipe with a tac rag and then start shooting!
Robert
-
According to Mr. Miyagi, you use your right hand. Of course it's well known that most of us have "waxed-off" with our right hands. H^^
-
Shhh!
Robert