stunthanger.com
Building Tips and technical articles. => Building techniques => Topic started by: Vincent Judd on June 03, 2018, 09:49:49 AM
-
Just wondering what is the best building method to insure a strong, wobble free wing mount for landing gear using the customary hardened wood blocks with the slot milled out down the center. I actually added a second block on the top of mine where the wire comes through and bushed the hole with brass tubing, but my gear still wobbles.
I fly off of grass, not pavement, so my gear takes a bit of a beating.
I was thinking of removing the brass tube, drilling the holes out larger and possibly bushing them with a piece of CF rod. I'm hoping that this next fix will be a permanent one.
What's the best way to insure a strong, wobble free wing mount for landing gear?
Thanks
Vince
-
I like the Rabe style groove retention system combined with Windys Long top wire that goes all the way to the top of the wing against the spar.
-
I myself have never worried about the wobbly gear flying off grass. But I have thought of lining the groove with silicone sealant or glue. H^^