stunthanger.com

Building Tips and technical articles. => Building techniques => Topic started by: Ty Marcucci on March 29, 2020, 11:50:56 AM

Title: Profile landing gear.
Post by: Ty Marcucci on March 29, 2020, 11:50:56 AM

 D>K

Title: Re: Profile landing gear.
Post by: Steve Helmick on April 01, 2020, 12:26:52 PM

Planning ahead is an important part of model building, for sure. I'm pretty good at the planning part, and even the commitment part, but not so good at the starting part. Can't decide which model to start on.  y1 Steve

Title: Re: Profile landing gear.
Post by: Robert Whitley on April 02, 2020, 09:11:16 AM

If you have a flexible shaft attachment for your moto-saw or moto-tool you might be able to get it in close enough to drill the holes.

It worked for me.

Title: Re: Profile landing gear.
Post by: rich gorrill on April 03, 2020, 05:09:43 AM

Hello Ty, I give you credit for telling us about your mistake. I usually curse, call myself a dope, curse, then hope I don't have to call someone to help me out of a jamb. L.O.L.


rich

Title: Re: Profile landing gear.
Post by: Mike Griffin on April 04, 2020, 07:41:44 PM

Ty I have done the same thing.  I was using the flat duralloy two piece profile gear.  If you do it once, you will not do it again and drill the holes ahead of time. 

Mike

Title: Re: Profile landing gear.
Post by: Crist Rigotti on April 04, 2020, 09:26:17 PM

Yup, I've done the same thing!