Hello
If anyone has questions about what they see on the plans, or any other questions please feel free to ask.
Either Robert or myself will be happy to try to answer for you.
I have all the horns bellcranks etc for most all airplanes.
THe controls setup is critical for best performance
Let me know If I can help
the controls ratio we use is 1.25 inches to the flap horn, then either 1 inch to 1inch or 3/4 to 3/4
Basic Material list
1- plan for the plane your building...let Randy know which one
1- large pack GP arrow hinges
2 3\8 x 1\2 inch Maple MM x 12
2-1\8 x3x 37 inch balsa
2-1\8 x3x 18 balsa
1-1\8 inch hard balsa
1- 1\4 inch hard balsa
16-1\16 x 3 x 36 balsa
1-1\2 x 3 x 36
2-1 in x 3 x 36
1-3\16 for stringers
3 -1\4 x 3 x36
3-3\8 x 3 x 36
1-plywood 1\8 inch lite ply
1-small piece 1\16 plywood
1-pair 2 inch lite wheel
1-3\4 inch tail wheel
1-4.5 ounce uniflow tank
1-Motor 32 to 46 Magnum 36, Aero Tiger Brodak 40, LA or FP 40-46,etc.
1-Landing gear dural or CF 40 size
1-set axels
1-4 inch hd lite Bellcrank
1-lead out guide
Lead outs
Push rods set
1- pair HD 3 \32 horns
1- 1 3\4 in NN Aero Spinner
1-ft yard cf mat
4-40 bolts and blind nuts
1-1\16 piano wire
1- 3\32 piano wire
1- set SLOW cure epoxy
1-tip weight box
1- canopy for the plane you build
Solder gun
1-3\32 wheel collars
1-3 1\8 wheel collar
Wheel pants
Randy Smith
980 Winnbrook Dr.
Dacula, GA. 30019
1-678-407-9376
randyaero@msn.com
www.aeroproduct.net You will also need sandpaper of various grits. 40-2000
Regards
Randy