stunthanger.com
Building Tips and technical articles. => Building techniques => Topic started by: Ty Marcucci on July 16, 2016, 10:07:40 AM
-
This may be a no brainer to many of us, but many guys just getting into or back into the hobby tend to forget this. Just a hint, FWIW. D>K
-
I couldn't agree more, Chief, and if you think hard balsa is tough on blades, try using them on ebony, rosewood, and maple fretboards for inlay work! Wow. There's not really a feeling like that first cut with a new blade. Ya wonder why you didn't change it sooner!
-
I use 2 handles, one for most stuff and a new sharp one for special cuts. Then I put new blade on the one that's most dull and switch them so the most stuff knife stays pretty sharp too.
MM
-
Why is a new build more worthy of a new blade than at any other time?
I ALWAYS keep a stone nearby whenever I am cutting balsa.
Your edge can never be too sharp.
-
https://www.youtube.com/watch?v=B6NLcAAMd8c
-
Phooey Ty, that's bad advice! You just haven't lived until you build a model solely with a dull pocket knife. They just don't go as deep when you cut yourself. :## :## S?P
-
I would like to take your advice. But they took away all my sharp tools and things.
-
Before I revisited my aero model building hobby my son and I did a lot of deer hunting and I absolutely hate a dull blade
He turned me on to a company called Havalon that took surgical blades to a new level for boning and skinning and even fish filleting using disposable surgical style blades...very large form factor
I bought a few of the normal surgical handles (big fat ones for my arthritic hands) in two blade sizes and several 100 count boxes of their different surgical blades
I doubt I have used an Xacto blade more than 5 times in the last 7 builds
I think the prices for a handle and box of blades is real reasonable and they are very very sharp ...curious that they don't dull too badly with balsa but Monocoat does a job to the edge...(I think mostly a build of adhesive is making them drag)
PS look past the hunting stuff and look at the variety of handles and small form factor blades