stunthanger.com

Building Tips and technical articles. => Building techniques => Topic started by: Fred Quedenfeld jr on December 09, 2020, 07:27:09 AM

Title: Mo best wing
Post by: Fred Quedenfeld jr on December 09, 2020, 07:27:09 AM

Have you built a Mobest wing
what did you use on your Mobest wing for leading edge and spars
thanks
Fred Q

Title: Re: Mo best wing
Post by: Perry Rose on December 09, 2020, 01:39:52 PM

I bought the kit from Mike Griffin laser cut by RSM. The plans show laminated leading and trailing edges that fit into notches in the ribs and 1/4 square for the spars. The designer used 1/4 square for the spars and 3/8 square for the leading edge, and 1/4 square for the trailing edge with 1/16 sheet over that. Pretty standard.  If you are scratch building one the flaps have an arc for the trailing edge. I tried to figure out the arc and it's about 10 feet. Maybe RSM would cut a short kit.