stunthanger.com
Building Tips and technical articles. => Building techniques => Topic started by: Dennis Toth on May 19, 2020, 01:36:29 PM
-
Working on the S-1 Ringmaster rebuild I'm looking at replacing the wire gear with maybe a carbon fiber bolt on or Aluminum. Who makes/sells these components?
Best, DennisT
-
Steve Wilk of Eliminator Props makes CF landing gear exactly what you need
-
Hi Dennis! How about something like these? I use them on Ringmasters and such and slightly longer ones for planes mike my modified Big Tigers. They're plenty strong enough! I use the Brodak aluminum Gear Blanks, BG-1964 or BG-1965 with Dubro 1/8" or 3/16" axles as needed/preferred. I'd like to ask $25 plus shipping or you can easily do 'em your self and save the $5.00 ;) :) :)
Jim Carter
-
I tend to make my own.
-
How long are those Eliminator Prop landing struts? It says they are for a Primary Force so I'm thinking they are too long for a Ringmaster.
Motorman 8)
Try moving them up the fuselage side (fit higher up)
Or pick up some 1/2 x 1/8 aluminum strip from a hardware store and bend to shape.
(Similar to the original Primary Force ARF gear).